暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

SAMSUNG

SAMSUNG M368L3223FTN-CCC 256MB DDR 400 PC3200 CL3 184-Pin memory upgrade

SKU CH-GZRN-TBP3M MPN M368L3223FTN-CCC

256 MB DDR 400 PC3200 CL3 184-pin module upgrades compatible legacy systems with Samsung Original reliability

  • Capacity256MB
  • Type184-Pin DDR SDRAM
  • SpeedDDR 400 (PC 3200)
  • CAS LatencyCL3
  • Voltage2.60V
  • Heat SpreaderNo
  • 256MB capacity supports legacy system upgrades
  • DDR 400 speed matches PC3200 specification
  • CL3 latency delivers responsive memory timing
  • 184-pin DDR SDRAM fits compatible desktop slots
  • 60V operation suits period-correct hardware

256 MB DDR 400 CL3 System Memory

This 256 MB DDR 400 (PC 3200) module uses 184-pin DDR SDRAM with CL3 latency and 2.60 V operation. It is a new Samsung Original part built for systems that require this exact specification.

Suits legacy DDR 400 platforms needing a single

Buyers who want more storage, higher speed grades, lower CAS latency, heat spreaders or larger capacities should look at something else. Motherboards limited to SDR memory or different pin counts will not accept this module.

184-pin DDR SDRAM form factor

The 184-pin DDR interface is the single specification that decides whether this is the right part; the board must physically and electrically support 184-pin DDR SDRAM at DDR 400.

特長

  • 256MB capacity supports legacy system upgrades
  • DDR 400 speed matches PC3200 specification
  • CL3 latency delivers responsive memory timing
  • 184-pin DDR SDRAM fits compatible desktop slots
  • 60V operation suits period-correct hardware

仕様

BrandSAMSUNG
SeriesOriginal
ModelM368L3223FTN-CCC
Capacity256MB
Type184-Pin DDR SDRAM
SpeedDDR 400 (PC 3200)
CAS LatencyCL3
Voltage2.60V
Heat SpreaderNo
配送重量0.14 kg
梱包サイズ140 × 51 × 13 mm

この商品に関する質問

How much power does this 2.60 V DDR 400 module draw when the system runs all day?

The module operates at 2.60 V, the standard voltage for DDR 400 SDRAM. Power draw scales with capacity and bus activity; a 256 MB stick at this voltage typically draws a few watts under load.

What motherboard slot is required to install this 184-pin DDR SDRAM?

A desktop motherboard with an 184-pin DDR DIMM slot keyed for 2.60 V DDR 400 (PC 3200) memory is required.

Will this CL3 256 MB module work in a system that already has PC 3200 memory installed?

Yes, it is a PC 3200 (DDR 400) module with CL3 latency. The memory controller will run all installed DDR 400 sticks at the slowest common timings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。