NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
SAMSUNG
32 GB DDR4 2133 ECC load-reduced server memory module with CL15 timing at 1.2 V
This SAMSUNG M386A4G40DM0-CPB module delivers 32 GB of DDR4 2133 memory with ECC and load-reduced buffering. It targets enterprise servers that require high-capacity DIMMs and data-integrity protection for mission-critical applications. The 288-pin form factor fits standard DDR4 server slots.
The module runs at 1.20 V with 15-15-15 timings and CAS latency 15, keeping power draw and heat low during continuous multi-threaded loads. Load-reduced architecture reduces electrical loading on the memory bus, allowing larger memory configurations to remain stable over extended periods. ECC corrects single-bit errors in real time, preventing silent data corruption during long compute jobs.
The DIMM installs like any 288-pin DDR4 module, but the motherboard must explicitly support LRDIMM technology and 4Rx4 rank organisation. Mixing LRDIMMs with registered or unbuffered DIMMs will prevent the system from posting. Verify that the server BIOS recognises load-reduced modules before populating all slots.
| Brand | SAMSUNG |
|---|---|
| Model | M386A4G40DM0-CPB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Timing | 15-15-15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Sūtījuma svars | 0.04 kg |
| Sūtījuma izmēri | 169 × 52 × 15 mm |
The module operates at 1.20 volts, the standard DDR4 voltage, so power draw per stick stays low and heat output remains modest even under sustained load.
It fits a 288-pin DDR4 slot and needs a platform that supports Load Reduced DIMMs with ECC and 4Rx4 organisation.
Mixing LRDIMMs with standard registered DIMMs is not supported; all slots must use the same memory technology for the system to operate correctly.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?