SAMSUNG
SAMSUNG PM9A3 1.92TB U.2 7mm enterprise SSD
A 1.92 TB enterprise NVMe U.2 SSD built for servers that need high performance and enhanced data reliability
- 92 TB capacity stores large enterprise datasets
- PCIe 4x4 NVMe interface delivers high throughput for server workloads
- U.2 7 mm form factor fits 2.5" hot-swap bays
- Enterprise-grade design protects critical business data
- New condition ensures full manufacturer-rated endurance
PM9A3 1.92TB U.2 enterprise SSD
The Samsung PM9A3 is a 1.92TB NVMe U.2 solid state drive built for servers that demand consistent performance and data integrity. Its 2.5-inch form factor fits standard enterprise drive bays and targets IT teams managing business-critical workloads.
Installation and common pitfalls
The drive slides into a U.2 backplane or carrier using the standard 7mm z-height, so no adapters are required when the chassis supports the form factor. Problems usually appear when the backplane wiring or BIOS does not expose the PCIe 4x4 lanes the controller expects.
Pre-order checklist
Confirm the server or storage array accepts a 2.5-inch U.2 NVMe device and that the backplane provides a PCIe 4x4 electrical connection. Verify the drive bay accommodates the 7mm thickness and that firmware or RAID controllers recognise the PM9A3 model.
Priekšrocības
- 92 TB capacity stores large enterprise datasets
- PCIe 4x4 NVMe interface delivers high throughput for server workloads
- U.2 7 mm form factor fits 2.5" hot-swap bays
- Enterprise-grade design protects critical business data
- New condition ensures full manufacturer-rated endurance
Specifikācijas
Šai precei pagaidām nav publicētu specifikāciju.
Jautājumi par šo preci
How can I confirm the PM9A3 1.92TB is performing correctly after installation?
Verify the drive appears in the server BIOS or OS as a 1.92TB NVMe device, then run a SMART health check to ensure zero reallocated sectors and normal temperature readings under load.
What ships with the MZ-QL21T900 and what must I source separately?
The drive itself ships alone; no mounting bracket, caddy, heatsink or cables are included, so obtain a compatible U.2 backplane or adapter and any required screws for your 2.5" bay.
Which capacity should I choose if I need the exact model shown in the listing?
The listed MPN MZ-QL21T900 corresponds to the single 1.92TB capacity; no other capacities or versions are associated with this part number.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
