We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Samsung PM9A3 1.92TB U.2 7mm 2.5 inch enterprise NVMe SSD

SAMSUNG

SAMSUNG PM9A3 1.92TB U.2 7mm enterprise SSD

SKU CH-11XW-FTYAM

A 1.92 TB enterprise NVMe U.2 SSD built for servers that need high performance and enhanced data reliability

  • 92 TB capacity stores large enterprise datasets
  • PCIe 4x4 NVMe interface delivers high throughput for server workloads
  • U.2 7 mm form factor fits 2.5" hot-swap bays
  • Enterprise-grade design protects critical business data
  • New condition ensures full manufacturer-rated endurance

PM9A3 1.92TB U.2 enterprise SSD

The Samsung PM9A3 is a 1.92TB NVMe U.2 solid state drive built for servers that demand consistent performance and data integrity. Its 2.5-inch form factor fits standard enterprise drive bays and targets IT teams managing business-critical workloads.

Installation and common pitfalls

The drive slides into a U.2 backplane or carrier using the standard 7mm z-height, so no adapters are required when the chassis supports the form factor. Problems usually appear when the backplane wiring or BIOS does not expose the PCIe 4x4 lanes the controller expects.

Pre-order checklist

Confirm the server or storage array accepts a 2.5-inch U.2 NVMe device and that the backplane provides a PCIe 4x4 electrical connection. Verify the drive bay accommodates the 7mm thickness and that firmware or RAID controllers recognise the PM9A3 model.

Highlights

  • 92 TB capacity stores large enterprise datasets
  • PCIe 4x4 NVMe interface delivers high throughput for server workloads
  • U.2 7 mm form factor fits 2.5" hot-swap bays
  • Enterprise-grade design protects critical business data
  • New condition ensures full manufacturer-rated endurance

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the PM9A3 1.92TB is performing correctly after installation?

Verify the drive appears in the server BIOS or OS as a 1.92TB NVMe device, then run a SMART health check to ensure zero reallocated sectors and normal temperature readings under load.

What ships with the MZ-QL21T900 and what must I source separately?

The drive itself ships alone; no mounting bracket, caddy, heatsink or cables are included, so obtain a compatible U.2 backplane or adapter and any required screws for your 2.5" bay.

Which capacity should I choose if I need the exact model shown in the listing?

The listed MPN MZ-QL21T900 corresponds to the single 1.92TB capacity; no other capacities or versions are associated with this part number.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.