Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
SanDisk Industrial microSDHC card, plain black finish

SanDisk

SanDisk Industrial microSDHC 16GB U1 80/50 MB/s 384 TBW

SKU CH-NFCB-TJHB7

Industrial microSDHC card with 16 GB capacity, 80 MB/s read, 50 MB/s write and 384 TBW endurance

  • Card typeMicroSD
  • TypemicroSDHC
  • Capacity16GB
  • Speed Class RatingU1
  • Read Speed80 MB/s
  • Write Speed50 MB/s

Option N/A

  • 80 MB/s read speed captures data fast
  • 50 MB/s write speed logs events quickly
  • 384 TBW endurance extends product life
  • MLC NAND and firmware protect against power loss
  • Operates from -40 °C to 85 °C in harsh environments

Industrial microSDHC for continuous logging

The SanDisk Industrial microSDHC 16GB card is built for embedded and edge devices that write constantly. MLC NAND and a 384 TBW endurance rating let it survive years of dash-cam, surveillance or telemetry workloads without wearing out.

U1 speed class guarantees 50 MB/s sustained write

The single figure that decides fit is the U1 minimum sequential write speed of 50 MB/s. If your recorder or data logger needs a guaranteed floor above that, this card will not meet the requirement.

Wide temperature range with no moving parts

Operating from -25 °C to 85 °C and rated to -40 °C for storage, the card draws only 2.7 V to 3.6 V and generates no audible noise. Solid-state construction makes it immune to vibration, shock and magnetic fields.

Priekšrocības

  • 80 MB/s read speed captures data fast
  • 50 MB/s write speed logs events quickly
  • 384 TBW endurance extends product life
  • MLC NAND and firmware protect against power loss
  • Operates from -40 °C to 85 °C in harsh environments

Specifikācijas

BrandSanDisk
Card typeMicroSD
SeriesIndustrial Wide Temp IX QD332
ModelSDSDQAF3-016G-I
TypemicroSDHC
Capacity16GB
Speed Class RatingU1
Read Speed80 MB/s
Write Speed50 MB/s
FeaturesMLC NAND, Endurance Up to 384 TBW
OptionN/A

Citas šī modeļa versijas

Vēl 4 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 80 MB/s read speed hold up in a dash-cam that records continuously?

The card is rated for up to 80 MB/s read and 50 MB/s write under U1 Class 10, so sustained recording at typical dash-cam bit-rates is well within its sequential write capability.

Does the UHS-I U1 rating limit performance in a Raspberry Pi Compute Module 4?

The card uses a UHS-I U1 interface, capping bus throughput at the U1 level; the Compute Module 4’s SD interface will not exceed that ceiling.

What are the physical dimensions and temperature limits for mounting this card in an outdoor enclosure?

It is a standard microSDHC form factor and operates from -25 °C to 85 °C (extended to -40 °C to 85 °C), fitting any microSD slot in that temperature range.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.