Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
SanDisk Industrial microSDHC card, plain black finish

SanDisk

SanDisk Industrial microSDHC 16GB U1 80/50 MB/s 384 TBW

SKU CH-NFCB-TJHB7

Industrial microSDHC card with 16 GB capacity, 80 MB/s read, 50 MB/s write and 384 TBW endurance

  • Card typeMicroSD
  • TypemicroSDHC
  • Capacity16GB
  • Speed Class RatingU1
  • Read Speed80 MB/s
  • Write Speed50 MB/s

Option N/A

  • 80 MB/s read speed captures data fast
  • 50 MB/s write speed logs events quickly
  • 384 TBW endurance extends product life
  • MLC NAND and firmware protect against power loss
  • Operates from -40 °C to 85 °C in harsh environments

Industrial microSDHC for continuous logging

The SanDisk Industrial microSDHC 16GB card is built for embedded and edge devices that write constantly. MLC NAND and a 384 TBW endurance rating let it survive years of dash-cam, surveillance or telemetry workloads without wearing out.

U1 speed class guarantees 50 MB/s sustained write

The single figure that decides fit is the U1 minimum sequential write speed of 50 MB/s. If your recorder or data logger needs a guaranteed floor above that, this card will not meet the requirement.

Wide temperature range with no moving parts

Operating from -25 °C to 85 °C and rated to -40 °C for storage, the card draws only 2.7 V to 3.6 V and generates no audible noise. Solid-state construction makes it immune to vibration, shock and magnetic fields.

Ciri-ciri utama

  • 80 MB/s read speed captures data fast
  • 50 MB/s write speed logs events quickly
  • 384 TBW endurance extends product life
  • MLC NAND and firmware protect against power loss
  • Operates from -40 °C to 85 °C in harsh environments

Spesifikasi

BrandSanDisk
Card typeMicroSD
SeriesIndustrial Wide Temp IX QD332
ModelSDSDQAF3-016G-I
TypemicroSDHC
Capacity16GB
Speed Class RatingU1
Read Speed80 MB/s
Write Speed50 MB/s
FeaturesMLC NAND, Endurance Up to 384 TBW
OptionN/A

Versi lain model ini

4 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Will the 80 MB/s read speed hold up in a dash-cam that records continuously?

The card is rated for up to 80 MB/s read and 50 MB/s write under U1 Class 10, so sustained recording at typical dash-cam bit-rates is well within its sequential write capability.

Does the UHS-I U1 rating limit performance in a Raspberry Pi Compute Module 4?

The card uses a UHS-I U1 interface, capping bus throughput at the U1 level; the Compute Module 4’s SD interface will not exceed that ceiling.

What are the physical dimensions and temperature limits for mounting this card in an outdoor enclosure?

It is a standard microSDHC form factor and operates from -25 °C to 85 °C (extended to -40 °C to 85 °C), fitting any microSD slot in that temperature range.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.