Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 3.5-inch bare internal hard drive with exposed circuit board

Seagate

Seagate ST31500341ASProduct 1.5TB 7200rpm 32MB 3.5" internal hard drive

SKU CH-3AM1-ZCF45 MPN ST31500341ASProduct

1.5 TB desktop hard drive with 7200 RPM spindle speed, 32 MB cache and SATA 3.0 Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity1.5TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Cache32MB
  • 5 TB capacity for large media libraries
  • 7200 RPM spindle speed for responsive daily computing
  • 32 MB cache to smooth burst workloads
  • SATA 3.0 Gb/s interface for broad desktop compatibility
  • Perpendicular Magnetic Recording technology enables high areal density

Capacity and Interface

The Seagate Barracuda 7200.11 is a 3.5 inch internal hard drive with a 1.5TB capacity and a SATA 3.0Gb/s interface. It spins at 7200 RPM and includes a 32MB cache for daily computing tasks. The bare drive uses Perpendicular Magnetic Recording technology and supports Native Command Queuing.

Suitability and Limits

This drive suits desktop PCs that need a 1.5TB SATA storage volume for general file storage and operating system use. It is not for systems that require a faster interface than SATA 3.0Gb/s, nor for builds limited to 2.5 inch drive bays. Buyers who need more than 1.5TB of capacity on a single drive should look at larger models.

Deciding Specification

The SATA 3.0Gb/s interface is the single specification that decides compatibility. Your motherboard or controller must provide a standard SATA port operating at 3.0Gb/s to use this drive. Without that port the drive cannot be connected or recognised by the system.

Priekšrocības

  • 5 TB capacity for large media libraries
  • 7200 RPM spindle speed for responsive daily computing
  • 32 MB cache to smooth burst workloads
  • SATA 3.0 Gb/s interface for broad desktop compatibility
  • Perpendicular Magnetic Recording technology enables high areal density

Specifikācijas

BrandSeagate
ModelST31500341AS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity1.5TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Cache32MB
Features3D Defense System
UsageFor Daily Computing
Form Factor3.5"

Jautājumi par šo preci

Does this drive need a SATA 3.0Gb/s port and a standard 3.5-inch bay with power and data cables?

Yes — it connects through a 7-pin SATA 3.0Gb/s interface and fits a 3.5" bay, so you need a matching motherboard port, a SATA data cable and a SATA power lead from the PSU.

Will the 32MB cache and NCQ on this 7200.11 drive work with an older SATA 1.5Gb/s controller?

The drive is backward-compatible with SATA 1.5Gb/s controllers; NCQ and the 32MB cache remain active, though sustained transfer will be limited to the older bus speed.

How can I verify the 1.5TB Barracuda is running at its rated 7200 RPM and 120 MB/s after installation?

Check the SMART data for a spindle speed of 7200 RPM and run a sequential read benchmark; sustained throughput near 120 MB/s confirms the PMR media and 32MB cache are performing as specified.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.