Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Silver 3.5-inch bare internal hard drive with exposed circuit board

Seagate

Seagate ST31500341ASProduct 1.5TB 7200rpm 32MB 3.5" internal hard drive

SKU CH-3AM1-ZCF45 MPN ST31500341ASProduct

1.5 TB desktop hard drive with 7200 RPM spindle speed, 32 MB cache and SATA 3.0 Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity1.5TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Cache32MB
  • 5 TB capacity for large media libraries
  • 7200 RPM spindle speed for responsive daily computing
  • 32 MB cache to smooth burst workloads
  • SATA 3.0 Gb/s interface for broad desktop compatibility
  • Perpendicular Magnetic Recording technology enables high areal density

Capacity and Interface

The Seagate Barracuda 7200.11 is a 3.5 inch internal hard drive with a 1.5TB capacity and a SATA 3.0Gb/s interface. It spins at 7200 RPM and includes a 32MB cache for daily computing tasks. The bare drive uses Perpendicular Magnetic Recording technology and supports Native Command Queuing.

Suitability and Limits

This drive suits desktop PCs that need a 1.5TB SATA storage volume for general file storage and operating system use. It is not for systems that require a faster interface than SATA 3.0Gb/s, nor for builds limited to 2.5 inch drive bays. Buyers who need more than 1.5TB of capacity on a single drive should look at larger models.

Deciding Specification

The SATA 3.0Gb/s interface is the single specification that decides compatibility. Your motherboard or controller must provide a standard SATA port operating at 3.0Gb/s to use this drive. Without that port the drive cannot be connected or recognised by the system.

Punti di forza

  • 5 TB capacity for large media libraries
  • 7200 RPM spindle speed for responsive daily computing
  • 32 MB cache to smooth burst workloads
  • SATA 3.0 Gb/s interface for broad desktop compatibility
  • Perpendicular Magnetic Recording technology enables high areal density

Caratteristiche tecniche

BrandSeagate
ModelST31500341AS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity1.5TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Cache32MB
Features3D Defense System
UsageFor Daily Computing
Form Factor3.5"

Domande su questo articolo

Does this drive need a SATA 3.0Gb/s port and a standard 3.5-inch bay with power and data cables?

Yes — it connects through a 7-pin SATA 3.0Gb/s interface and fits a 3.5" bay, so you need a matching motherboard port, a SATA data cable and a SATA power lead from the PSU.

Will the 32MB cache and NCQ on this 7200.11 drive work with an older SATA 1.5Gb/s controller?

The drive is backward-compatible with SATA 1.5Gb/s controllers; NCQ and the 32MB cache remain active, though sustained transfer will be limited to the older bus speed.

How can I verify the 1.5TB Barracuda is running at its rated 7200 RPM and 120 MB/s after installation?

Check the SMART data for a spindle speed of 7200 RPM and run a sequential read benchmark; sustained throughput near 120 MB/s confirms the PMR media and 32MB cache are performing as specified.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.