Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 3.5 inch bare hard drive with exposed circuit board

Seagate

Seagate ST3250620NS 250GB 7200 RPM 16MB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-900E-588HN MPN ST3250620NS

250 GB 3.5" SATA hard drive spinning at 7200 RPM with 16 MB cache for continuous 24 x 7 operation

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity250GB
  • RPM7200 RPM
  • Cache16MB
  • Average Seek Time8.5ms
  • 250 GB capacity for ample storage space
  • 7200 RPM spindle speed for responsive data access
  • 16 MB cache buffer for improved throughput
  • SATA 3.0 Gb/s interface for broad system compatibility
  • Designed for 24 x 7 operation with high reliability rating

Capacity and interface

The Seagate ST3250620NS is a 250GB 3.5-inch desktop internal hard drive with a SATA 3.0Gb/s interface. It spins at 7200 RPM and includes a 16MB cache for general storage tasks. The drive uses perpendicular recording technology and native command queuing for reliable operation. It is supplied as a bare drive in new condition.

Enterprise reliability focus

This drive suits users needing a drive rated for 24 x 7 operation with high rotational vibration tolerance. It is not intended for buyers who want larger storage capacities or higher transfer rates than 3.0Gb/s. Systems requiring a smaller form factor or a different interface will need an alternative drive.

SATA 3.0Gb/s interface

The drive connects via a SATA 3.0Gb/s interface, which determines compatibility with the host controller. Average seek time is 8.5ms, average write time is 10ms and average latency is 4.16ms. Verify that your system supports this interface and the 3.5-inch form factor before purchase.

Priekšrocības

  • 250 GB capacity for ample storage space
  • 7200 RPM spindle speed for responsive data access
  • 16 MB cache buffer for improved throughput
  • SATA 3.0 Gb/s interface for broad system compatibility
  • Designed for 24 x 7 operation with high reliability rating

Specifikācijas

BrandSeagate
SeriesBarraCuda ES
ModelST3250620NS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity250GB
RPM7200 RPM
Cache16MB
Average Seek Time8.5ms
Average Write Time10ms
Average Latency4.16ms
FeaturesPerpendicular recording technology for maximum capacity and reliability
Native command queuing (NCQ) for enhanced performance
Highest reliability rating for 24 x 7 operation
Best-in-class rotational vibration (RV) tolerance
Multidrive firmware maximizes system availability
Form Factor3.5"
Sūtījuma svars0.58 kg
Sūtījuma izmēri147 × 102 × 25 mm

Jautājumi par šo preci

What SATA host interface must my system provide for the ST3250620NS to operate at its rated 3.0Gb/s transfer rate?

The drive connects via a standard SATA 3.0Gb/s port; any motherboard or controller with a SATA 3.0Gb/s (SATA II) connector will allow it to run at full speed.

Can the 7200 RPM BarraCuda ES share a SATA controller with older, slower drives without limiting their operation?

Each SATA device negotiates its own link speed independently, so the ST3250620NS running at 3.0Gb/s will not force older drives to run faster than they support.

How can I verify the drive is healthy and performing at its specified 8.5ms average seek time after installation?

Run the manufacturer's SeaTools diagnostic or any SMART-capable utility; a passing short self-test and SMART attributes showing no reallocated sectors confirm the drive is working as intended.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.