Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 3.5 inch bare hard drive with exposed circuit board

Seagate

Seagate ST3250620NS 250GB 7200 RPM 16MB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-900E-588HN MPN ST3250620NS

250 GB 3.5" SATA hard drive spinning at 7200 RPM with 16 MB cache for continuous 24 x 7 operation

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity250GB
  • RPM7200 RPM
  • Cache16MB
  • Average Seek Time8.5ms
  • 250 GB capacity for ample storage space
  • 7200 RPM spindle speed for responsive data access
  • 16 MB cache buffer for improved throughput
  • SATA 3.0 Gb/s interface for broad system compatibility
  • Designed for 24 x 7 operation with high reliability rating

Capacity and interface

The Seagate ST3250620NS is a 250GB 3.5-inch desktop internal hard drive with a SATA 3.0Gb/s interface. It spins at 7200 RPM and includes a 16MB cache for general storage tasks. The drive uses perpendicular recording technology and native command queuing for reliable operation. It is supplied as a bare drive in new condition.

Enterprise reliability focus

This drive suits users needing a drive rated for 24 x 7 operation with high rotational vibration tolerance. It is not intended for buyers who want larger storage capacities or higher transfer rates than 3.0Gb/s. Systems requiring a smaller form factor or a different interface will need an alternative drive.

SATA 3.0Gb/s interface

The drive connects via a SATA 3.0Gb/s interface, which determines compatibility with the host controller. Average seek time is 8.5ms, average write time is 10ms and average latency is 4.16ms. Verify that your system supports this interface and the 3.5-inch form factor before purchase.

Přednosti

  • 250 GB capacity for ample storage space
  • 7200 RPM spindle speed for responsive data access
  • 16 MB cache buffer for improved throughput
  • SATA 3.0 Gb/s interface for broad system compatibility
  • Designed for 24 x 7 operation with high reliability rating

Specifikace

BrandSeagate
SeriesBarraCuda ES
ModelST3250620NS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity250GB
RPM7200 RPM
Cache16MB
Average Seek Time8.5ms
Average Write Time10ms
Average Latency4.16ms
FeaturesPerpendicular recording technology for maximum capacity and reliability
Native command queuing (NCQ) for enhanced performance
Highest reliability rating for 24 x 7 operation
Best-in-class rotational vibration (RV) tolerance
Multidrive firmware maximizes system availability
Form Factor3.5"
Přepravní hmotnost0.58 kg
Rozměry balení147 × 102 × 25 mm

Otázky k tomuto produktu

What SATA host interface must my system provide for the ST3250620NS to operate at its rated 3.0Gb/s transfer rate?

The drive connects via a standard SATA 3.0Gb/s port; any motherboard or controller with a SATA 3.0Gb/s (SATA II) connector will allow it to run at full speed.

Can the 7200 RPM BarraCuda ES share a SATA controller with older, slower drives without limiting their operation?

Each SATA device negotiates its own link speed independently, so the ST3250620NS running at 3.0Gb/s will not force older drives to run faster than they support.

How can I verify the drive is healthy and performing at its specified 8.5ms average seek time after installation?

Run the manufacturer's SeaTools diagnostic or any SMART-capable utility; a passing short self-test and SMART attributes showing no reallocated sectors confirm the drive is working as intended.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.