Seagate ST2000NM001A 2TB 7200RPM 256MB SATA 3.5" internal hard drive
- SATA 6.0Gb/s
- 2TB
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Seagate
Enterprise-grade 6TB 3.5" SATA hard drive with 7200 RPM, 256MB cache, and 550 TB/year workload rating for 24×7 operation
Options 6TB Standard Model
The Seagate Exos 7E8 ST6000NM021A delivers six terabytes of capacity in a 3.5 inch form factor. It spins at 7200 RPM with a 256 MB cache and connects via a SATA 6.0 Gb/s interface. This new drive is built for continuous operation in bulk data environments.
The drive targets 24×7 workloads such as replicated storage arrays and RAID systems where vibration tolerance and a high annual workload rating matter. It is not designed for mobile enclosures or external backup kits that require bus power or a smaller physical footprint. Buyers needing silent desktop storage may prefer lower-speed alternatives.
The single specification that determines fit is the SATA 6.0 Gb/s interface, which requires a matching motherboard or controller port and a standard 3.5 inch drive bay with SATA power and data cables. Without that connection the drive cannot be installed or used.
| Brand | Seagate |
|---|---|
| Series | Exos 7E8 |
| Model | ST6000NM021A |
| Interface | SATA 6.0Gb/s |
| Capacity | 6TB |
| NAND Flash Memory Type | SLC |
| RPM | 7200 RPM |
| Cache | 256MB |
| Features | Hard Drive |
| Form Factor | 3.5" |
| Sūtījuma svars | 0.91 kg |
| Sūtījuma izmēri | 305 × 254 × 203 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Mount the drive in a 3.5" bay, attach both the SATA data cable and the SATA power connector from the PSU, then enable the SATA port in BIOS; the step often missed is connecting the power cable.
No scheduled maintenance is required; the drive is rated for 550 TB per year workloads and a 2 million hour MTBF, so replacement is only needed if it fails or capacity is exceeded.
The 550 TB per year workload rating is the first limit; exceeding it can reduce the 2 million hour MTBF reliability target.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?