Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver 3.5 inch SATA hard drive with circuit board visible

Seagate

Seagate ST6000NM021A 6TB 7200RPM 256MB SATA 3.5" internal hard drive

SKU CH-5ENJ-F12B9 MPN ST6000NM021A

Enterprise-grade 6TB 3.5" SATA hard drive with 7200 RPM, 256MB cache, and 550 TB/year workload rating for 24×7 operation

  • InterfaceSATA 6.0Gb/s
  • Capacity6TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Cache256MB
  • FeaturesHard Drive

Options 6TB Standard Model

  • 6 TB capacity stores massive data sets
  • 7200 RPM spindle speed accelerates read and write performance
  • 256 MB cache buffers bursts for smoother throughput
  • SATA 6.0 Gb/s interface enables fast host transfers
  • 550 TB yearly workload rating supports 24×7 enterprise duty

6 TB Enterprise Storage

The Seagate Exos 7E8 ST6000NM021A delivers six terabytes of capacity in a 3.5 inch form factor. It spins at 7200 RPM with a 256 MB cache and connects via a SATA 6.0 Gb/s interface. This new drive is built for continuous operation in bulk data environments.

Suited for RAID and data centres.

The drive targets 24×7 workloads such as replicated storage arrays and RAID systems where vibration tolerance and a high annual workload rating matter. It is not designed for mobile enclosures or external backup kits that require bus power or a smaller physical footprint. Buyers needing silent desktop storage may prefer lower-speed alternatives.

SATA 6.0 Gb/s interface decides compatibility

The single specification that determines fit is the SATA 6.0 Gb/s interface, which requires a matching motherboard or controller port and a standard 3.5 inch drive bay with SATA power and data cables. Without that connection the drive cannot be installed or used.

Pluspunten

  • 6 TB capacity stores massive data sets
  • 7200 RPM spindle speed accelerates read and write performance
  • 256 MB cache buffers bursts for smoother throughput
  • SATA 6.0 Gb/s interface enables fast host transfers
  • 550 TB yearly workload rating supports 24×7 enterprise duty

Specificaties

BrandSeagate
SeriesExos 7E8
ModelST6000NM021A
InterfaceSATA 6.0Gb/s
Capacity6TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Cache256MB
FeaturesHard Drive
Form Factor3.5"
Verzendgewicht0.91 kg
Pakketafmetingen305 × 254 × 203 mm

Andere versies van dit model

Nog 4 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I install the 3.5" SATA 6.0Gb/s drive and what step is often missed?

Mount the drive in a 3.5" bay, attach both the SATA data cable and the SATA power connector from the PSU, then enable the SATA port in BIOS; the step often missed is connecting the power cable.

What maintenance or replacement will the Exos 7E8 drive need later?

No scheduled maintenance is required; the drive is rated for 550 TB per year workloads and a 2 million hour MTBF, so replacement is only needed if it fails or capacity is exceeded.

What limit appears first under sustained 24×7 use?

The 550 TB per year workload rating is the first limit; exceeding it can reduce the 2 million hour MTBF reliability target.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.