Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with gold edge connector and 22-pin SATA socket

SMUGDESK

SMUGDESK mSATA Mini PCIe to 2.5" SATA II 22-Pin Adapter

SKU CH-YFTS-T5BRF

Converts an mSATA SSD into a standard 2.5 SATA drive for desktop or notebook storage expansion

  • Converts mSATA SSD into standard 2.5inch SATA drive
  • Fits standard 2.5inch bay for desktop and notebook mounting
  • Supports boot and stable read write under SATA II
  • Mounting holes secure adapter against vibration disconnects
  • Reuses existing mSATA SSD without new SATA purchase

Repurpose mSATA SSDs

This adapter converts an mSATA Mini PCIe solid-state drive into a standard 2.5inch SATA storage device. It lets you reuse idle mSATA SSDs for extra capacity or as a system drive in desktops and laptops without purchasing new SATA storage.

Verify drive bay and cables

Confirm your system has a free 2.5inch SATA drive bay and that both a SATA data cable and a SATA power cable are available. The mSATA SSD must be secured to the adapter with its locking screw before the assembly is mounted in the bay.

Stable operation under SATA II

The onboard conversion circuit follows the SATA II specification to maintain consistent signal transmission during extended file transfers, large-file copying and continuous system uptime. Mounting holes on the PCB keep the adapter and SSD firmly fixed, preventing intermittent recognition caused by chassis vibration.

Priekšrocības

  • Converts mSATA SSD into standard 2.5inch SATA drive
  • Fits standard 2.5inch bay for desktop and notebook mounting
  • Supports boot and stable read write under SATA II
  • Mounting holes secure adapter against vibration disconnects
  • Reuses existing mSATA SSD without new SATA purchase

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

Does the SMUGDESK adapter include an mSATA SSD or mounting screws?

The adapter card only converts an existing mSATA SSD; the solid-state drive and any securing screws must be supplied separately.

Which SATA version does this converter support for the mSATA drive?

The onboard circuit follows the SATA II specification, so the mSATA SSD will operate at SATA II speeds once installed.

Can the adapted drive boot an operating system in a standard 2.5 inch bay?

Yes, the assembly supports system booting and stable read-write performance when mounted in a 2.5 inch SATA drive bay.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.