暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with gold edge connector and 22-pin SATA socket

SMUGDESK

SMUGDESK mSATA Mini PCIe to 2.5" SATA II 22-Pin Adapter

SKU CH-YFTS-T5BRF

Converts an mSATA SSD into a standard 2.5 SATA drive for desktop or notebook storage expansion

  • Converts mSATA SSD into standard 2.5inch SATA drive
  • Fits standard 2.5inch bay for desktop and notebook mounting
  • Supports boot and stable read write under SATA II
  • Mounting holes secure adapter against vibration disconnects
  • Reuses existing mSATA SSD without new SATA purchase

Repurpose mSATA SSDs

This adapter converts an mSATA Mini PCIe solid-state drive into a standard 2.5inch SATA storage device. It lets you reuse idle mSATA SSDs for extra capacity or as a system drive in desktops and laptops without purchasing new SATA storage.

Verify drive bay and cables

Confirm your system has a free 2.5inch SATA drive bay and that both a SATA data cable and a SATA power cable are available. The mSATA SSD must be secured to the adapter with its locking screw before the assembly is mounted in the bay.

Stable operation under SATA II

The onboard conversion circuit follows the SATA II specification to maintain consistent signal transmission during extended file transfers, large-file copying and continuous system uptime. Mounting holes on the PCB keep the adapter and SSD firmly fixed, preventing intermittent recognition caused by chassis vibration.

特長

  • Converts mSATA SSD into standard 2.5inch SATA drive
  • Fits standard 2.5inch bay for desktop and notebook mounting
  • Supports boot and stable read write under SATA II
  • Mounting holes secure adapter against vibration disconnects
  • Reuses existing mSATA SSD without new SATA purchase

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the SMUGDESK adapter include an mSATA SSD or mounting screws?

The adapter card only converts an existing mSATA SSD; the solid-state drive and any securing screws must be supplied separately.

Which SATA version does this converter support for the mSATA drive?

The onboard circuit follows the SATA II specification, so the mSATA SSD will operate at SATA II speeds once installed.

Can the adapted drive boot an operating system in a standard 2.5 inch bay?

Yes, the assembly supports system booting and stable read-write performance when mounted in a 2.5 inch SATA drive bay.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。