Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Compact grey box 27 by 23 by 22 cm with four fans on top and a power port at the rear

Stellapex

Stellapex NerdOCTAXE 12T 12TH/s Bitcoin Miner

SKU CH-NRAH-7T0JM

SHA-256 Bitcoin miner delivering 12 TH/s at 240 W with 15 J/TH efficiency, eight BM1370 chips, four fans, 2.4 GHz Wi-Fi in a 27×23×22 cm, 3500 g plug-and-play unit

  • TypeMining Machine/Miner
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareBM370
  • Hashrate12TH/s
  • Network Connection2.4GWifi
  • 12 TH/s hashrate from eight BM1370 ASIC chips
  • 15 J/TH power efficiency at 240 W consumption
  • Four fans keep the unit cool and quiet for home use
  • 4 GHz Wi-Fi enables plug-and-play setup in minutes
  • Open-source Bitaxe web interface for simple monitoring and control

Solo miner for SHA-256 coins

The Stellapex NerdOCTAXE 12T is a self-contained Bitcoin miner built around eight BM1370 ASIC chips. It targets hobbyists and home users who want a plug-and-play device for solo or pool mining of BTC, BCH and BSV without external controllers. The open-source Bitaxe web interface handles setup, monitoring and control through a browser.

2.4 GHz Wi-Fi only connectivity

Network access relies exclusively on a 2.4 GHz wireless link; there is no wired Ethernet port. This limits deployment to locations with adequate 2.4 GHz coverage and makes the miner unsuitable for environments that require a wired backbone or 5 GHz-only networks. Latency and stability depend entirely on the local Wi-Fi conditions.

12 TH/s at 240 W with 15 J/TH efficiency

The unit delivers a nominal 12 TH/s while drawing 240 W, yielding an efficiency of 15 J/TH. That output is competitive for a single-device home miner but far below the threshold needed for consistent solo block discovery on the Bitcoin network. Profitability hinges on low electricity rates and pool mining; it will not replace industrial-scale hardware.

Priekšrocības

  • 12 TH/s hashrate from eight BM1370 ASIC chips
  • 15 J/TH power efficiency at 240 W consumption
  • Four fans keep the unit cool and quiet for home use
  • 4 GHz Wi-Fi enables plug-and-play setup in minutes
  • Open-source Bitaxe web interface for simple monitoring and control

Specifikācijas

BrandStellapex
SeriesNerdOCTAXE 12T
ModelNerdOCTAXE 12T
TypeMining Machine/Miner
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareBM370
Hashrate12TH/s
Network Connection2.4GWifi
Fan4
Power SupplyAC Adapter
Power Consumption240W
Power Efficiency15 J/TH
Dimension27*23*22cm
Weight3500g

Jautājumi par šo preci

How do I decide between the 12TH/s model and a lower-hashrate version for home mining?

The 12TH/s version uses eight BM1370 chips and draws 240W at 15J/TH, so it fits a standard household circuit while still delivering meaningful daily rewards for BTC, BCH or BSV.

What does 12TH/s actually mean when the miner is running in my living room?

It means the unit performs 12 trillion SHA-256 hashes every second, earning a small but steady fraction of a Bitcoin block reward while consuming about 240W, roughly the same as a desktop PC under load.

Will the 2.4GHz WiFi link limit my pool connection or earnings?

The 2.4GHz band handles the tiny stratum packets used by mining pools easily; your internet uplink, not the WiFi, is the practical bottleneck for share submission.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.