Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact grey box 27 by 23 by 22 cm with four fans on top and a power port at the rear

Stellapex

Stellapex NerdOCTAXE 12T 12TH/s Bitcoin Miner

SKU CH-NRAH-7T0JM

SHA-256 Bitcoin miner delivering 12 TH/s at 240 W with 15 J/TH efficiency, eight BM1370 chips, four fans, 2.4 GHz Wi-Fi in a 27×23×22 cm, 3500 g plug-and-play unit

  • TypeMining Machine/Miner
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareBM370
  • Hashrate12TH/s
  • Network Connection2.4GWifi
  • 12 TH/s hashrate from eight BM1370 ASIC chips
  • 15 J/TH power efficiency at 240 W consumption
  • Four fans keep the unit cool and quiet for home use
  • 4 GHz Wi-Fi enables plug-and-play setup in minutes
  • Open-source Bitaxe web interface for simple monitoring and control

Solo miner for SHA-256 coins

The Stellapex NerdOCTAXE 12T is a self-contained Bitcoin miner built around eight BM1370 ASIC chips. It targets hobbyists and home users who want a plug-and-play device for solo or pool mining of BTC, BCH and BSV without external controllers. The open-source Bitaxe web interface handles setup, monitoring and control through a browser.

2.4 GHz Wi-Fi only connectivity

Network access relies exclusively on a 2.4 GHz wireless link; there is no wired Ethernet port. This limits deployment to locations with adequate 2.4 GHz coverage and makes the miner unsuitable for environments that require a wired backbone or 5 GHz-only networks. Latency and stability depend entirely on the local Wi-Fi conditions.

12 TH/s at 240 W with 15 J/TH efficiency

The unit delivers a nominal 12 TH/s while drawing 240 W, yielding an efficiency of 15 J/TH. That output is competitive for a single-device home miner but far below the threshold needed for consistent solo block discovery on the Bitcoin network. Profitability hinges on low electricity rates and pool mining; it will not replace industrial-scale hardware.

Kohokohdat

  • 12 TH/s hashrate from eight BM1370 ASIC chips
  • 15 J/TH power efficiency at 240 W consumption
  • Four fans keep the unit cool and quiet for home use
  • 4 GHz Wi-Fi enables plug-and-play setup in minutes
  • Open-source Bitaxe web interface for simple monitoring and control

Tekniset tiedot

BrandStellapex
SeriesNerdOCTAXE 12T
ModelNerdOCTAXE 12T
TypeMining Machine/Miner
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareBM370
Hashrate12TH/s
Network Connection2.4GWifi
Fan4
Power SupplyAC Adapter
Power Consumption240W
Power Efficiency15 J/TH
Dimension27*23*22cm
Weight3500g

Kysymyksiä tästä tuotteesta

How do I decide between the 12TH/s model and a lower-hashrate version for home mining?

The 12TH/s version uses eight BM1370 chips and draws 240W at 15J/TH, so it fits a standard household circuit while still delivering meaningful daily rewards for BTC, BCH or BSV.

What does 12TH/s actually mean when the miner is running in my living room?

It means the unit performs 12 trillion SHA-256 hashes every second, earning a small but steady fraction of a Bitcoin block reward while consuming about 240W, roughly the same as a desktop PC under load.

Will the 2.4GHz WiFi link limit my pool connection or earnings?

The 2.4GHz band handles the tiny stratum packets used by mining pools easily; your internet uplink, not the WiFi, is the practical bottleneck for share submission.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.