Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small black 40mm square case fan with Maglev Hypro bearing, 3-pin connector, no LED

SXDOOL

SXDOOL 40mm Maglev Hypro Case Fan 24V 1.7W 8200 RPM 10.8CFM 32.0 dB 3-Pin Black

SKU CH-WFJC-S4YBX

Compact 40mm Maglev Hypro fan delivers 10.8CFM airflow at 8200 RPM with 32.0 dB noise for 24V systems

  • TypeCase Fan
  • Fan Size40mm
  • Bearing TypeMaglev Hypro bearing
  • RPM8200 r. p. m.
  • Air Flow10.8CFM
  • Noise Level32.0 dB ( A )
  • Maglev Hypro bearing cuts friction for 50,000-hour L10 life at 25 °C
  • 8200 RPM delivers 10.8 CFM airflow in a 40 × 40 × 20 mm frame
  • 24 V DC input with 7.0–26.6 V range suits varied power rails
  • 0 dB(A) noise at full speed keeps acoustics low
  • 3-pin connector provides tach signal for fan-speed monitoring

SXDOOL 40mm 24V Maglev Hypro Fan

This 40mm axial fan runs on a 24V DC supply and draws 1.7W at its rated speed of 8200 RPM. It uses a Maglev Hypro bearing to deliver 10.8CFM of airflow at 32.0 dB(A) through a standard 3-pin connector. The black frame measures 40 × 40 × 20mm and is built from glass-fibre reinforced plastic with PBT housing and PA blades.

Who this suits and who should look elsewhere

It suits builds that provide a 24V fan header or a compatible DC source within the 7.0V to 26.6V range and need compact spot cooling for heatsinks or tight chassis zones. It is not for systems that cannot supply the required voltage range or that need PWM speed control via a 4-pin header.

Deciding specification — 24V rated voltage

The fan is rated for 24V DC with an operating window of 7.0V to 26.6V; if your fan header or controller cannot deliver voltage in this range the fan will not run correctly.

Priekšrocības

  • Maglev Hypro bearing cuts friction for 50,000-hour L10 life at 25 °C
  • 8200 RPM delivers 10.8 CFM airflow in a 40 × 40 × 20 mm frame
  • 24 V DC input with 7.0–26.6 V range suits varied power rails
  • 0 dB(A) noise at full speed keeps acoustics low
  • 3-pin connector provides tach signal for fan-speed monitoring

Specifikācijas

TypeCase Fan
Fan Size40mm
Bearing TypeMaglev Hypro bearing
RPM8200 r. p. m.
Air Flow10.8CFM
Noise Level32.0 dB ( A )
Power Connector3 Pin
ColorBlack
LEDNo

Jautājumi par šo preci

Should I pick the 24 V model or a lower-voltage version for my build?

This fan is rated for DC 24 V and accepts a range from 7.0 V to 26.6 V, so choose it when your system provides a 24 V rail.

What does 8200 RPM actually deliver inside a case?

At 8200 RPM the fan moves 10.8 CFM of air while producing 32.0 dB(A), giving strong airflow for a 40 mm frame.

How does the 3-pin connector limit speed control?

The 3-pin connector supplies power and a tachometer signal; voltage regulation is required for speed changes, as PWM is not supported.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.