Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

SXDOOL

SXDOOL 40mm Maglev Hypro Case Fan 24V 1.7W 8200 RPM 10.8CFM 32.0 dB 3-Pin Black

SKU CH-WFJC-S4YBX

Compact 40mm Maglev Hypro fan delivers 10.8CFM airflow at 8200 RPM with 32.0 dB noise for 24V systems

  • TypeCase Fan
  • Fan Size40mm
  • Bearing TypeMaglev Hypro bearing
  • RPM8200 r. p. m.
  • Air Flow10.8CFM
  • Noise Level32.0 dB ( A )
  • Maglev Hypro bearing cuts friction for 50,000-hour L10 life at 25 °C
  • 8200 RPM delivers 10.8 CFM airflow in a 40 × 40 × 20 mm frame
  • 24 V DC input with 7.0–26.6 V range suits varied power rails
  • 0 dB(A) noise at full speed keeps acoustics low
  • 3-pin connector provides tach signal for fan-speed monitoring

SXDOOL 40mm 24V Maglev Hypro Fan

This 40mm axial fan runs on a 24V DC supply and draws 1.7W at its rated speed of 8200 RPM. It uses a Maglev Hypro bearing to deliver 10.8CFM of airflow at 32.0 dB(A) through a standard 3-pin connector. The black frame measures 40 × 40 × 20mm and is built from glass-fibre reinforced plastic with PBT housing and PA blades.

Who this suits and who should look elsewhere

It suits builds that provide a 24V fan header or a compatible DC source within the 7.0V to 26.6V range and need compact spot cooling for heatsinks or tight chassis zones. It is not for systems that cannot supply the required voltage range or that need PWM speed control via a 4-pin header.

Deciding specification — 24V rated voltage

The fan is rated for 24V DC with an operating window of 7.0V to 26.6V; if your fan header or controller cannot deliver voltage in this range the fan will not run correctly.

Kohokohdat

  • Maglev Hypro bearing cuts friction for 50,000-hour L10 life at 25 °C
  • 8200 RPM delivers 10.8 CFM airflow in a 40 × 40 × 20 mm frame
  • 24 V DC input with 7.0–26.6 V range suits varied power rails
  • 0 dB(A) noise at full speed keeps acoustics low
  • 3-pin connector provides tach signal for fan-speed monitoring

Tekniset tiedot

TypeCase Fan
Fan Size40mm
Bearing TypeMaglev Hypro bearing
RPM8200 r. p. m.
Air Flow10.8CFM
Noise Level32.0 dB ( A )
Power Connector3 Pin
ColorBlack
LEDNo

Kysymyksiä tästä tuotteesta

Should I pick the 24 V model or a lower-voltage version for my build?

This fan is rated for DC 24 V and accepts a range from 7.0 V to 26.6 V, so choose it when your system provides a 24 V rail.

What does 8200 RPM actually deliver inside a case?

At 8200 RPM the fan moves 10.8 CFM of air while producing 32.0 dB(A), giving strong airflow for a 40 mm frame.

How does the 3-pin connector limit speed control?

The 3-pin connector supplies power and a tachometer signal; voltage regulation is required for speed changes, as PWM is not supported.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.