Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Square black 80mm CPU fan 15mm thick four-wire connector

SXDOOL

SXDOOL EVERFLOW R128015DH 12V .32A 80mm 15mm 4-wire CPU fan

SKU CH-V9P9-0TA2A

An 80 mm square, 15 mm thick CPU fan with a 4-wire PWM connector running at 12 V and 0.32 A

  • 12 V .32 A four-wire PWM speed control
  • 80 mm square frame fits tight CPU cooler builds
  • 15 mm slim profile clears low-profile heatsinks
  • 4-pin connector enables motherboard fan-curve management
  • EVERFLOW R128015DH model built for continuous 12 V operation

Compact 80 mm CPU cooler

The SXDOOL EVERFLOW R128015DH is an 80 mm square fan measuring 15 mm thick, built for CPU air cooling in tight spaces. It runs on a 12 V supply drawing 0.32 A and connects through a standard 4-wire PWM header. This unit suits builders assembling small-form-factor or low-profile systems where height clearance is limited.

4-pin PWM integration

The four-wire connector plugs directly into a motherboard CPU fan header, allowing the board to control speed automatically based on temperature. No separate fan controller or adapter cable is required, and the 12 V 0.32 A draw keeps the load on the header well within typical limits. The 8015 frame fits standard 80 mm mounting holes found on many low-profile heatsinks.

Steady thermal dissipation

At constant 12 V 0.32 A operation the fan delivers continuous airflow across the heatsink fins without the ramp-up and spin-down cycles seen in short bursts. This steady state keeps CPU temperatures stable during prolonged workloads such as rendering or compiling. The 15 mm thickness provides enough static pressure for dense fin stacks while remaining quiet at sustained speeds.

Priekšrocības

  • 12 V .32 A four-wire PWM speed control
  • 80 mm square frame fits tight CPU cooler builds
  • 15 mm slim profile clears low-profile heatsinks
  • 4-pin connector enables motherboard fan-curve management
  • EVERFLOW R128015DH model built for continuous 12 V operation

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

What is the maximum current draw of the R128015DH fan under continuous operation?

The fan is rated at 0.32 A on a 12 V supply, so sustained use will not exceed that current.

What are the physical dimensions of the R128015DH that determine case clearance?

It measures 80 mm by 80 mm by 15 mm, matching the standard 8015 form factor.

What motherboard header is required to run the 4-wire R128015DH?

A standard 4-pin PWM header supplies both power and speed control for this fan.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.