Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Square black 80mm CPU fan 15mm thick four-wire connector

SXDOOL

SXDOOL EVERFLOW R128015DH 12V .32A 80mm 15mm 4-wire CPU fan

SKU CH-V9P9-0TA2A

An 80 mm square, 15 mm thick CPU fan with a 4-wire PWM connector running at 12 V and 0.32 A

  • 12 V .32 A four-wire PWM speed control
  • 80 mm square frame fits tight CPU cooler builds
  • 15 mm slim profile clears low-profile heatsinks
  • 4-pin connector enables motherboard fan-curve management
  • EVERFLOW R128015DH model built for continuous 12 V operation

Compact 80 mm CPU cooler

The SXDOOL EVERFLOW R128015DH is an 80 mm square fan measuring 15 mm thick, built for CPU air cooling in tight spaces. It runs on a 12 V supply drawing 0.32 A and connects through a standard 4-wire PWM header. This unit suits builders assembling small-form-factor or low-profile systems where height clearance is limited.

4-pin PWM integration

The four-wire connector plugs directly into a motherboard CPU fan header, allowing the board to control speed automatically based on temperature. No separate fan controller or adapter cable is required, and the 12 V 0.32 A draw keeps the load on the header well within typical limits. The 8015 frame fits standard 80 mm mounting holes found on many low-profile heatsinks.

Steady thermal dissipation

At constant 12 V 0.32 A operation the fan delivers continuous airflow across the heatsink fins without the ramp-up and spin-down cycles seen in short bursts. This steady state keeps CPU temperatures stable during prolonged workloads such as rendering or compiling. The 15 mm thickness provides enough static pressure for dense fin stacks while remaining quiet at sustained speeds.

Prednosti

  • 12 V .32 A four-wire PWM speed control
  • 80 mm square frame fits tight CPU cooler builds
  • 15 mm slim profile clears low-profile heatsinks
  • 4-pin connector enables motherboard fan-curve management
  • EVERFLOW R128015DH model built for continuous 12 V operation

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

What is the maximum current draw of the R128015DH fan under continuous operation?

The fan is rated at 0.32 A on a 12 V supply, so sustained use will not exceed that current.

What are the physical dimensions of the R128015DH that determine case clearance?

It measures 80 mm by 80 mm by 15 mm, matching the standard 8015 form factor.

What motherboard header is required to run the 4-wire R128015DH?

A standard 4-pin PWM header supplies both power and speed control for this fan.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.