Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Compact square CPU cooler with copper base and aluminium fins, black axial fan centred on top

SXDOOL

SXDOOL FD128032HB 8032 12V 0.37A 80*80*32 mm CPU cooler

SKU CH-63ZW-DGR2K

An 80 mm square copper-and-aluminium heatsink with a 12 V 0.37 A axial fan for CPU cooling in a computer case

  • Efficient 12 V operation draws only 0.37 A
  • Compact 80 mm square footprint fits tight cases
  • Copper and aluminium heatsink moves heat from the CPU
  • 32 mm slim profile clears low-profile motherboard layouts
  • Light 0.15 kg unit adds minimal load to the board

Compact 80 mm copper-aluminium cooler

The SXDOOL FD128032HB is a low-profile air cooler built for standard computer cases. Its 80 by 80 by 32 mm footprint suits tight builds where full-height towers cannot fit. The unit targets 12 V systems drawing 0.37 A, making it a straightforward drop-in for compatible CPU sockets.

Copper core with aluminium fins

A copper base transfers heat into aluminium fins driven by an axial fan. The combined metal construction keeps weight to 0.15 kg while maintaining structural rigidity. Mounting hardware is included, so installation proceeds without sourcing extra brackets or fasteners.

Replaces stock coolers in space-constrained chassis

This cooler upgrades factory coolers that run loud or throttle under sustained loads. The improvement is most noticeable in small-form-factor or office PCs where clearance is limited. Builders needing higher thermal capacity for overclocking or multi-core workloads should consider larger solutions.

Priekšrocības

  • Efficient 12 V operation draws only 0.37 A
  • Compact 80 mm square footprint fits tight cases
  • Copper and aluminium heatsink moves heat from the CPU
  • 32 mm slim profile clears low-profile motherboard layouts
  • Light 0.15 kg unit adds minimal load to the board

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

What power connector does the FD128032HB use and what current does it draw?

The cooler runs on a 12 V supply and draws 0.37 A, so it connects to a standard 12 V fan header on the motherboard.

How much clearance does the 80×80×32 mm heatsink need inside the case?

The unit measures 80 mm wide, 80 mm deep and 32 mm tall, so allow at least that much space around the CPU socket and check for RAM or VRM heatsink interference.

How is the FD128032HB mounted and what step is often missed?

It uses the supplied mounting hardware to clamp the copper-and-aluminium heatsink onto the CPU; the step many forget is applying a thin, even layer of thermal paste before tightening the screws.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.