Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Compact square CPU cooler with copper base and aluminium fins, black axial fan centred on top

SXDOOL

SXDOOL FD128032HB 8032 12V 0.37A 80*80*32 mm CPU cooler

SKU CH-63ZW-DGR2K

An 80 mm square copper-and-aluminium heatsink with a 12 V 0.37 A axial fan for CPU cooling in a computer case

  • Efficient 12 V operation draws only 0.37 A
  • Compact 80 mm square footprint fits tight cases
  • Copper and aluminium heatsink moves heat from the CPU
  • 32 mm slim profile clears low-profile motherboard layouts
  • Light 0.15 kg unit adds minimal load to the board

Compact 80 mm copper-aluminium cooler

The SXDOOL FD128032HB is a low-profile air cooler built for standard computer cases. Its 80 by 80 by 32 mm footprint suits tight builds where full-height towers cannot fit. The unit targets 12 V systems drawing 0.37 A, making it a straightforward drop-in for compatible CPU sockets.

Copper core with aluminium fins

A copper base transfers heat into aluminium fins driven by an axial fan. The combined metal construction keeps weight to 0.15 kg while maintaining structural rigidity. Mounting hardware is included, so installation proceeds without sourcing extra brackets or fasteners.

Replaces stock coolers in space-constrained chassis

This cooler upgrades factory coolers that run loud or throttle under sustained loads. The improvement is most noticeable in small-form-factor or office PCs where clearance is limited. Builders needing higher thermal capacity for overclocking or multi-core workloads should consider larger solutions.

Helstu kostir

  • Efficient 12 V operation draws only 0.37 A
  • Compact 80 mm square footprint fits tight cases
  • Copper and aluminium heatsink moves heat from the CPU
  • 32 mm slim profile clears low-profile motherboard layouts
  • Light 0.15 kg unit adds minimal load to the board

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

What power connector does the FD128032HB use and what current does it draw?

The cooler runs on a 12 V supply and draws 0.37 A, so it connects to a standard 12 V fan header on the motherboard.

How much clearance does the 80×80×32 mm heatsink need inside the case?

The unit measures 80 mm wide, 80 mm deep and 32 mm tall, so allow at least that much space around the CPU socket and check for RAM or VRM heatsink interference.

How is the FD128032HB mounted and what step is often missed?

It uses the supplied mounting hardware to clamp the copper-and-aluminium heatsink onto the CPU; the step many forget is applying a thin, even layer of thermal paste before tightening the screws.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.