Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
1U rackmount NAS, black metal chassis, four front drive bays, rear dual power supplies

Synology Inc.

Synology RS826RP+ AMD Ryzen V1500B 4-Bay Rackmount NAS 4GB RAM 2-Port 10GbE 24TB (4 x 6TB)

SKU CH-F4P4-YPPG9

Compact 1U rackmount NAS with AMD Ryzen V1500B, four 1GbE ports, dual 10GbE, 4GB DDR4 and 24TB of Synology Plus drives pre-installed

  • Port RJ-454 x 10/100/1000M 2 x 10GbE 10GBASE-T
  • Port USB2 x USB 3.2 Gen 1 Ports
  • Form Factor4-Bay
  • ProcessorAMD Ryzen
  • Installed Memory4GB
  • Included HDD Capacity24TB (4 x 6TB)
  • Quad-core AMD Ryzen V1500B at 2.2 GHz powers demanding workloads
  • Four 1 GbE ports plus two 10 GbE ports deliver high-throughput networking
  • 24 TB raw capacity from four 6 TB Synology Plus drives ready to deploy
  • 4 GB DDR4 ECC memory supports reliable data integrity
  • 1U rackmount form factor fits standard cabinets for space-efficient edge deployment

Compact 1U Rackmount NAS for Edge Deployments

The Synology RS826RP+ is a 1U rackmount NAS built for edge deployments, branch offices and remote business workloads. It runs on a quad-core, eight-thread AMD Ryzen V1500B processor at 2.2 GHz with 4GB DDR4 RAM. Four 6TB Synology Plus drives provide 24TB raw capacity in a fully assembled and tested unit.

Sustained Sequential Performance Over 2000 MB/s Read

Under Synology tested configuration the system delivers sequential read performance over 2000 MB/s and write performance over 1300 MB/s. Four integrated 1GbE ports support Link Aggregation for bandwidth increase, load balancing and automatic network failover. A PCIe Gen3 slot allows adding a 10GbE or 25GbE adapter, an M.2 SSD adapter or a combined M.2 and 10GbE adapter. Compatible SSDs can be used for caching to reduce latency and improve IOPS in HDD arrays.

Hot-Swap Bays and Expansion Unit Simplify Growth

Four hot-swappable drive bays accept 3.5-inch SATA hard drives and 2.5-inch SATA SSDs for straightforward drive replacement. One Synology RX426 expansion unit can be connected to increase the system to eight bays and up to 192 TB raw storage using supported 24 TB drives. The unit operates between 0°C and 35°C with 5 to 95 percent relative humidity on 100-240 VAC 50/60Hz power.

Priekšrocības

  • Quad-core AMD Ryzen V1500B at 2.2 GHz powers demanding workloads
  • Four 1 GbE ports plus two 10 GbE ports deliver high-throughput networking
  • 24 TB raw capacity from four 6 TB Synology Plus drives ready to deploy
  • 4 GB DDR4 ECC memory supports reliable data integrity
  • 1U rackmount form factor fits standard cabinets for space-efficient edge deployment

Specifikācijas

BrandSynology
ModelRS826RP+
Port RJ-454 x 10/100/1000M
2 x 10GbE 10GBASE-T
Port USB2 x USB 3.2 Gen 1 Ports
Form Factor4-Bay
ProcessorAMD Ryzen
Installed Memory4GB
Included HDD Capacity24TB (4 x 6TB)
ManagementWeb-Based, DHCP Client
LEDsPower, HDD (Hard Disk Drive), LAN (10/100)
Power100-240 VAC 50/60Hz
Temperature0°C - 35 °C
Humidity5-95% R.H
Dimensions44 mm × 480 mm × 492.6 mm
Weight8.0 kg
Package ContentsMain Unit × 1
Accessory Pack × 1
AC Power Cord × 1
All Configuration Items

Jautājumi par šo preci

How much power does the RS826RP+ draw when the four 6 TB drives and the 10 GbE adapter run continuously?

The unit operates on 100-240 VAC at 50/60 Hz and is rated for an ambient range of 0 °C to 35 °C, so sustained loads stay within normal rack thermal limits.

Which drives or expansion units must I already own to use the four populated bays and the PCIe slot?

The four 6 TB Synology Plus drives are pre-installed; adding capacity only requires a compatible RX426 expansion unit and supported 3.5-inch SATA drives.

Will the four 1 GbE ports and the installed 10 GbE adapter work with my existing Cat 5e cabling and older 1 GbE switches?

The 1 GbE ports negotiate down to 10/100/1000 M speeds on legacy cables, while the 10GBASE-T ports require Cat 6a or better for full 10 GbE throughput.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.