Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black standalone Compact Flash duplicator with LCD screen and 79 card slots

Systor

Systor 1 to 79 Compact Flash Duplicator

SKU CH-9Q4S-JQJ8Y

Duplicates up to 79 Compact Flash cards simultaneously with 256 MB buffer and standalone LCD control

  • TypeCompact Flash Duplicator
  • Target1 to 79
  • Buffer Memory256 MB
  • Supported MediaCompact Flash Type 1, 2, Microdrives
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 79

  • Standalone operation copies CF cards without a computer
  • 79 targets duplicated simultaneously from one source
  • 256 MB buffer sustains full speed on every channel
  • Asynchronous mode loads and copies each slot independently
  • Quick Copy supports FAT16, FAT32, NTFS, EXT2, EXT3, EXT4

Standalone CF Duplicator

The Systor duplicator copies Compact Flash cards to as many as 79 targets in a single operation. It runs without a host computer and uses a 256 MB buffer to sustain throughput across every channel. A four-button LCD interface lets the operator start, monitor and verify each job.

High-volume CF workflows

This unit suits organisations that need to replicate CF Type 1, Type 2 or Microdrive media in batch without tying up a PC. It is not for buyers who need to duplicate SD, USB or SATA storage formats, nor for workflows that require network-attached or software-driven duplication.

SATA-connected targets

Each of the 79 slots connects over SATA so every target operates at full speed independently. The duplicator accepts 115 V or 230 V mains power at 50 Hz or 60 Hz and draws up to 250 W.

Priekšrocības

  • Standalone operation copies CF cards without a computer
  • 79 targets duplicated simultaneously from one source
  • 256 MB buffer sustains full speed on every channel
  • Asynchronous mode loads and copies each slot independently
  • Quick Copy supports FAT16, FAT32, NTFS, EXT2, EXT3, EXT4

Specifikācijas

TypeCompact Flash Duplicator
Target1 to 79
Buffer Memory256 MB
Supported MediaCompact Flash Type 1, 2, Microdrives
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 250 W

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How many Compact Flash cards can the Systor duplicator copy at once?

The duplicator supports 1 to 79 targets, so you can copy up to 79 Compact Flash cards simultaneously from a single source.

What is the power draw when the unit runs continuously all day?

The power supply is rated at 250 W and accepts 115 or 230 V at 50 or 60 Hz.

What interface must my source and target cards use to work with this duplicator?

The duplicator uses SATA connectors for each slot, so your Compact Flash cards must be compatible with that interface.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.