Systor 1-15 CF Duplicator 256 MB Buffer Black
- Compact Flash Dupli…
- 1 to 15
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Systor
Duplicates one Compact Flash card to up to 39 targets simultaneously with 256 MB buffer and standalone LCD operation
The Systor duplicator copies one Compact Flash card to as many as 39 targets in a single operation. It runs without a host computer and uses a four-button LCD interface to select copy or erase functions. Each channel works independently so users can load or unload cards without pausing other slots. The unit supports Compact Flash Type 1, Type 2 and Microdrive media.
The integrated power supply accepts 115 or 230 V input at 50 or 60 Hz and is rated at 400 W. A 256 MB buffer absorbs data bursts during simultaneous write cycles. The standalone design keeps the chassis free of host-side software overhead, so heat output remains tied to the number of active target slots rather than background host activity.
In asynchronous mode every channel loads, copies and verifies at its own pace, so a slow card on one slot does not throttle the others. Bit-by-bit comparison runs after each write pass to confirm data integrity across all targets. The LCD reports progress per channel, allowing operators to swap finished cards while remaining slots continue copying.
| Type | Compact Flash Duplicator |
|---|---|
| Target | 1 to 39 |
| Buffer Memory | 256 MB |
| Supported Media | Compact Flash Type 1, 2, Microdrives |
| Language Support | English, Japanese, Spanish, Portuguese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Connector | SATA |
| Panel Color | Black |
| Load Type | Slot |
| Key Features | Synchronous or Asynchronous mode |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Power Supply | 115/230 V, 50/60 Hz, 400 W |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Connect the 400 W power supply to 115 or 230 V at 50 or 60 Hz, insert the source Compact Flash card into the first slot and target cards into the remaining slots up to 39, then select copy mode on the LCD; the step often missed is confirming the buffer shows 256 MB ready before starting.
The 256 MB buffer memory and SATA connector are solid-state with no moving parts; only the slot-load mechanism and cooling fan may wear after heavy use, so keep vents clear and reseat cards gently.
The 400 W power supply and 256 MB buffer set the ceiling; continuous asynchronous duplication across 39 slots will hit thermal or current limits before the buffer overflows.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?