暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone Compact Flash duplicator with 39 slots and LCD display

Systor

Systor 1 to 39 CF Duplicator 256 MB Buffer 400 W

SKU CH-YW25-H89N7

Duplicates one Compact Flash card to up to 39 targets simultaneously with 256 MB buffer and standalone LCD operation

  • TypeCompact Flash Duplicator
  • Target1 to 39
  • Buffer Memory256 MB
  • Supported MediaCompact Flash Type 1, 2, Microdrives
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 39

  • Standalone operation copies CF cards without a computer
  • 256 MB buffer sustains throughput across all slots
  • Asynchronous mode lets each channel load and copy independently
  • 39 targets duplicated simultaneously from one source
  • LCD menu with four buttons controls every function

Standalone CF Duplicator

The Systor duplicator copies one Compact Flash card to as many as 39 targets in a single operation. It runs without a host computer and uses a four-button LCD interface to select copy or erase functions. Each channel works independently so users can load or unload cards without pausing other slots. The unit supports Compact Flash Type 1, Type 2 and Microdrive media.

400 W Power Supply Thermal Profile

The integrated power supply accepts 115 or 230 V input at 50 or 60 Hz and is rated at 400 W. A 256 MB buffer absorbs data bursts during simultaneous write cycles. The standalone design keeps the chassis free of host-side software overhead, so heat output remains tied to the number of active target slots rather than background host activity.

Sustained Multi-Slot Copy Behaviour

In asynchronous mode every channel loads, copies and verifies at its own pace, so a slow card on one slot does not throttle the others. Bit-by-bit comparison runs after each write pass to confirm data integrity across all targets. The LCD reports progress per channel, allowing operators to swap finished cards while remaining slots continue copying.

特長

  • Standalone operation copies CF cards without a computer
  • 256 MB buffer sustains throughput across all slots
  • Asynchronous mode lets each channel load and copy independently
  • 39 targets duplicated simultaneously from one source
  • LCD menu with four buttons controls every function

仕様

TypeCompact Flash Duplicator
Target1 to 39
Buffer Memory256 MB
Supported MediaCompact Flash Type 1, 2, Microdrives
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the Systor CF duplicator and what step is often missed?

Connect the 400 W power supply to 115 or 230 V at 50 or 60 Hz, insert the source Compact Flash card into the first slot and target cards into the remaining slots up to 39, then select copy mode on the LCD; the step often missed is confirming the buffer shows 256 MB ready before starting.

What maintenance or replacement will the duplicator need later?

The 256 MB buffer memory and SATA connector are solid-state with no moving parts; only the slot-load mechanism and cooling fan may wear after heavy use, so keep vents clear and reseat cards gently.

What limit appears first during sustained copying?

The 400 W power supply and 256 MB buffer set the ceiling; continuous asynchronous duplication across 39 slots will hit thermal or current limits before the buffer overflows.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。