暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone Compact Flash duplicator with LCD screen and 63 card slots

Systor

Systor 1 to 63 CF Duplicator 256 MB Buffer SATA Black

SKU CH-3MDC-CX3FY

Standalone Compact Flash duplicator copies one card to up to 63 targets simultaneously with 256 MB buffer and LCD control

  • TypeCompact Flash Duplicator
  • Target1 to 63
  • Buffer Memory256 MB
  • Supported MediaCompact Flash Type 1, 2, Microdrives
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 63

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Standalone operation copies up to 63 CF cards without a computer
  • 256 MB buffer memory maintains speed across all 63 channels
  • Asynchronous mode lets each slot load, unload and copy independently
  • LCD screen with four-button control simplifies job setup
  • Bit-by-bit compare verifies every copy for data integrity

Standalone CF Duplicator

The Systor unit copies Compact Flash Type 1, Type 2 and Microdrive media without a host computer. It targets business, education and government users who need to duplicate existing CF cards in minimal time. A four-button LCD interface controls the process.

63-Target Capacity and Buffer

The duplicator writes to one source and up to sixty-three targets simultaneously. Each channel operates independently with a 256 MB buffer, so asynchronous duplication avoids speed loss when cards are loaded or unloaded. Synchronous mode is also available.

SATA Interface Constraints

Every port uses a SATA connector for the CF slot, limiting the duplicator to that interface. The 600 W dual power supply supports the full target count, but the unit cannot copy media that requires a different bus or form factor.

特長

  • Standalone operation copies up to 63 CF cards without a computer
  • 256 MB buffer memory maintains speed across all 63 channels
  • Asynchronous mode lets each slot load, unload and copy independently
  • LCD screen with four-button control simplifies job setup
  • Bit-by-bit compare verifies every copy for data integrity

仕様

TypeCompact Flash Duplicator
Target1 to 63
Buffer Memory256 MB
Supported MediaCompact Flash Type 1, 2, Microdrives
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 600 W (300w x2)

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the SATA connector on the duplicator work with the older SATA cables I already have?

The unit uses a standard SATA interface for internal drive connections, so existing SATA cables are compatible.

How do I confirm each of the 63 copies finished without errors?

The LCD screen reports bit-by-bit compare results for every port after the copy cycle completes.

Does the box include the CF cards or just the duplicator?

Only the duplicator unit and its power supply are included; blank Compact Flash cards must be purchased separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。