Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black standalone Compact Flash duplicator with LCD screen and 63 card slots

Systor

Systor 1 to 63 CF Duplicator 256 MB Buffer SATA Black

SKU CH-3MDC-CX3FY

Standalone Compact Flash duplicator copies one card to up to 63 targets simultaneously with 256 MB buffer and LCD control

  • TypeCompact Flash Duplicator
  • Target1 to 63
  • Buffer Memory256 MB
  • Supported MediaCompact Flash Type 1, 2, Microdrives
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 63

  • Standalone operation copies up to 63 CF cards without a computer
  • 256 MB buffer memory maintains speed across all 63 channels
  • Asynchronous mode lets each slot load, unload and copy independently
  • LCD screen with four-button control simplifies job setup
  • Bit-by-bit compare verifies every copy for data integrity

Standalone CF Duplicator

The Systor unit copies Compact Flash Type 1, Type 2 and Microdrive media without a host computer. It targets business, education and government users who need to duplicate existing CF cards in minimal time. A four-button LCD interface controls the process.

63-Target Capacity and Buffer

The duplicator writes to one source and up to sixty-three targets simultaneously. Each channel operates independently with a 256 MB buffer, so asynchronous duplication avoids speed loss when cards are loaded or unloaded. Synchronous mode is also available.

SATA Interface Constraints

Every port uses a SATA connector for the CF slot, limiting the duplicator to that interface. The 600 W dual power supply supports the full target count, but the unit cannot copy media that requires a different bus or form factor.

Kohokohdat

  • Standalone operation copies up to 63 CF cards without a computer
  • 256 MB buffer memory maintains speed across all 63 channels
  • Asynchronous mode lets each slot load, unload and copy independently
  • LCD screen with four-button control simplifies job setup
  • Bit-by-bit compare verifies every copy for data integrity

Tekniset tiedot

TypeCompact Flash Duplicator
Target1 to 63
Buffer Memory256 MB
Supported MediaCompact Flash Type 1, 2, Microdrives
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 600 W (300w x2)

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the SATA connector on the duplicator work with the older SATA cables I already have?

The unit uses a standard SATA interface for internal drive connections, so existing SATA cables are compatible.

How do I confirm each of the 63 copies finished without errors?

The LCD screen reports bit-by-bit compare results for every port after the copy cycle completes.

Does the box include the CF cards or just the duplicator?

Only the duplicator unit and its power supply are included; blank Compact Flash cards must be purchased separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.