Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black standalone Compact Flash duplicator with LCD screen and 31 card slots

Systor

Systor 1 to 31 CF Duplicator 256 MB Buffer SATA

SKU CH-F2QM-SEBBM

Standalone CF duplicator copies one source to 31 targets simultaneously with 256 MB buffer and LCD control

  • TypeCompact Flash Duplicator
  • Target1 to 31
  • Buffer Memory256 MB
  • Supported MediaCompact Flash Type 1, 2, Microdrives
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 31

  • Standalone duplicator copies CF cards without a computer
  • 256 MB buffer keeps each channel running at full speed
  • Asynchronous mode lets you load and unload cards independently
  • LCD screen with four-button control simplifies operation
  • Bit-by-bit compare verifies every copy for data integrity

Standalone CF Duplicator

The Systor unit copies Compact Flash Type 1, Type 2 and Microdrive cards without a host computer. It targets one source to a maximum of 31 destinations in a single operation. A 256 MB buffer and SATA connectors feed each channel independently. The device suits organisations that need fast, repeatable duplication of legacy CF media.

Build integration needs

The duplicator runs from 115 or 230 V mains at 50 or 60 Hz with a 300 W supply built in. No software, driver or PCIe slot is required; the LCD screen and four-button panel handle every function. Each slot loads and unloads separately, so operators can swap cards while other channels continue copying.

Sustained-load behaviour

Asynchronous mode lets every channel copy at its own pace, preventing a slow card from holding up the rest. Bit-by-bit compare verifies each destination after the write pass finishes. Quick Copy skips empty space on FAT16, FAT32, NTFS and EXT2/3/4 volumes, while Whole Media copies every sector regardless of format.

Kohokohdat

  • Standalone duplicator copies CF cards without a computer
  • 256 MB buffer keeps each channel running at full speed
  • Asynchronous mode lets you load and unload cards independently
  • LCD screen with four-button control simplifies operation
  • Bit-by-bit compare verifies every copy for data integrity

Tekniset tiedot

TypeCompact Flash Duplicator
Target1 to 31
Buffer Memory256 MB
Supported MediaCompact Flash Type 1, 2, Microdrives
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 300 W

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How many Compact Flash cards can the duplicator copy at the same time?

The unit supports 1 to 31 target slots, so up to 31 Compact Flash cards can be duplicated simultaneously from a single source.

What is the power draw when the duplicator runs continuously?

The internal power supply is rated at 300 W and accepts 115/230 V at 50/60 Hz for sustained operation.

Does the duplicator need a computer or SATA host to operate?

No, it is a standalone device with its own LCD screen and four-button controller; a computer or SATA connection is not required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.