Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black standalone Compact Flash duplicator with LCD screen and 31 card slots

Systor

Systor 1 to 31 CF Duplicator 256 MB Buffer SATA

SKU CH-F2QM-SEBBM

Standalone CF duplicator copies one source to 31 targets simultaneously with 256 MB buffer and LCD control

  • TypeCompact Flash Duplicator
  • Target1 to 31
  • Buffer Memory256 MB
  • Supported MediaCompact Flash Type 1, 2, Microdrives
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 31

  • Standalone duplicator copies CF cards without a computer
  • 256 MB buffer keeps each channel running at full speed
  • Asynchronous mode lets you load and unload cards independently
  • LCD screen with four-button control simplifies operation
  • Bit-by-bit compare verifies every copy for data integrity

Standalone CF Duplicator

The Systor unit copies Compact Flash Type 1, Type 2 and Microdrive cards without a host computer. It targets one source to a maximum of 31 destinations in a single operation. A 256 MB buffer and SATA connectors feed each channel independently. The device suits organisations that need fast, repeatable duplication of legacy CF media.

Build integration needs

The duplicator runs from 115 or 230 V mains at 50 or 60 Hz with a 300 W supply built in. No software, driver or PCIe slot is required; the LCD screen and four-button panel handle every function. Each slot loads and unloads separately, so operators can swap cards while other channels continue copying.

Sustained-load behaviour

Asynchronous mode lets every channel copy at its own pace, preventing a slow card from holding up the rest. Bit-by-bit compare verifies each destination after the write pass finishes. Quick Copy skips empty space on FAT16, FAT32, NTFS and EXT2/3/4 volumes, while Whole Media copies every sector regardless of format.

Přednosti

  • Standalone duplicator copies CF cards without a computer
  • 256 MB buffer keeps each channel running at full speed
  • Asynchronous mode lets you load and unload cards independently
  • LCD screen with four-button control simplifies operation
  • Bit-by-bit compare verifies every copy for data integrity

Specifikace

TypeCompact Flash Duplicator
Target1 to 31
Buffer Memory256 MB
Supported MediaCompact Flash Type 1, 2, Microdrives
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 300 W

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How many Compact Flash cards can the duplicator copy at the same time?

The unit supports 1 to 31 target slots, so up to 31 Compact Flash cards can be duplicated simultaneously from a single source.

What is the power draw when the duplicator runs continuously?

The internal power supply is rated at 300 W and accepts 115/230 V at 50/60 Hz for sustained operation.

Does the duplicator need a computer or SATA host to operate?

No, it is a standalone device with its own LCD screen and four-button controller; a computer or SATA connection is not required.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.