Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Systor

Systor 1 to 7 CF Card Duplicator 256 MB Buffer

SKU CH-90Y3-JD88V

Standalone CF duplicator copies one source to seven targets simultaneously with 256 MB buffer and LCD control

  • TypeCompact Flash Duplicator
  • Target1 to 7
  • Buffer Memory256 MB
  • Supported MediaCompact Flash Type 1, 2, Microdrives
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen
  • Standalone operation copies CF cards without a computer
  • 256 MB buffer keeps data flowing to all targets
  • Asynchronous mode lets each slot load and copy independently
  • LCD with four buttons shows status and confirms copies
  • Powers from 115 or 230 V at 50 or 60 Hz

Standalone CF Card Duplicator

The Systor unit copies one Compact Flash card to as many as seven targets in a single operation. It runs without a host computer and uses a 256 MB buffer to sustain throughput across all channels. A four-button LCD interface lets the operator select copy, compare or erase functions.

Suited for bulk CF workflows; not for other media

Organisations that duplicate Compact Flash Type I, Type II or Microdrive cards in volume will benefit from independent, asynchronous ports. The duplicator does not support SD, CFast, CFexpress or any other card format, so buyers needing multi-format capability should look elsewhere.

Synchronous and asynchronous modes change copy

In synchronous mode every target writes the same data simultaneously. Asynchronous mode lets each slot load, unload and copy independently, so a finished card can be swapped while others continue. Quick Copy handles FAT16, FAT32, NTFS and Linux EXT2/EXT3/EXT4 file systems, while Whole Media Copy duplicates bit-for-bit regardless of format.

Kohokohdat

  • Standalone operation copies CF cards without a computer
  • 256 MB buffer keeps data flowing to all targets
  • Asynchronous mode lets each slot load and copy independently
  • LCD with four buttons shows status and confirms copies
  • Powers from 115 or 230 V at 50 or 60 Hz

Tekniset tiedot

TypeCompact Flash Duplicator
Target1 to 7
Buffer Memory256 MB
Supported MediaCompact Flash Type 1, 2, Microdrives
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 80 W

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Do I need a computer or software to operate the duplicator?

No, the unit is completely standalone with a 4-button LCD interface; it copies Compact Flash cards without any PC connection.

Will the SATA connector on the duplicator work with my older SATA drives?

The SATA connector is used internally for the duplicator's own operation; you do not connect external SATA drives to this unit, which copies only Compact Flash Type 1, Type 2 and Microdrive media.

How can I verify each copy is bit-for-bit identical after the process finishes?

The duplicator runs an automatic bit-by-bit compare function once copying completes, confirming every target card matches the source exactly.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.