Systor 1-15 CF Duplicator 256 MB Buffer Black
- Compact Flash Dupli…
- 1 to 15
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Systor
Duplicates one Compact Flash card to up to 39 targets simultaneously with 256 MB buffer and standalone LCD operation
The Systor duplicator copies one Compact Flash card to as many as 39 targets in a single operation. It runs without a host computer and uses a four-button LCD interface to select copy or erase functions. Each channel works independently so users can load or unload cards without pausing other slots. The unit supports Compact Flash Type 1, Type 2 and Microdrive media.
The integrated power supply accepts 115 or 230 V input at 50 or 60 Hz and is rated at 400 W. A 256 MB buffer absorbs data bursts during simultaneous write cycles. The standalone design keeps the chassis free of host-side software overhead, so heat output remains tied to the number of active target slots rather than background host activity.
In asynchronous mode every channel loads, copies and verifies at its own pace, so a slow card on one slot does not throttle the others. Bit-by-bit comparison runs after each write pass to confirm data integrity across all targets. The LCD reports progress per channel, allowing operators to swap finished cards while remaining slots continue copying.
| Type | Compact Flash Duplicator |
|---|---|
| Target | 1 to 39 |
| Buffer Memory | 256 MB |
| Supported Media | Compact Flash Type 1, 2, Microdrives |
| Language Support | English, Japanese, Spanish, Portuguese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Connector | SATA |
| Panel Color | Black |
| Load Type | Slot |
| Key Features | Synchronous or Asynchronous mode |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Power Supply | 115/230 V, 50/60 Hz, 400 W |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Connect the 400 W power supply to 115 or 230 V at 50 or 60 Hz, insert the source Compact Flash card into the first slot and target cards into the remaining slots up to 39, then select copy mode on the LCD; the step often missed is confirming the buffer shows 256 MB ready before starting.
The 256 MB buffer memory and SATA connector are solid-state with no moving parts; only the slot-load mechanism and cooling fan may wear after heavy use, so keep vents clear and reseat cards gently.
The 400 W power supply and 256 MB buffer set the ceiling; continuous asynchronous duplication across 39 slots will hit thermal or current limits before the buffer overflows.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?