Systor 1 to 31 CF Duplicator 256 MB Buffer SATA
- Compact Flash Dupli…
- 1 to 31
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Systor
Standalone CF duplicator copies one source to 55 targets at up to 2GB/min with bit-by-bit verification
The Systor SYS-CFD-55 is a standalone Compact Flash duplicator that copies one source card to as many as 55 targets simultaneously. It operates without a host computer and uses an LCD screen with four control buttons for job selection and status feedback. The unit supports Compact Flash Type 1, Type 2 and Microdrive media in a slot-load design.
This duplicator suits organisations that need to clone large batches of Compact Flash cards quickly and without software installation. Asynchronous mode lets each channel load, copy and unload independently so operators can swap cards without pausing other slots. Buyers who work with SD, CFast or other memory formats, or who require a PC-connected imaging station, will not be served by this device.
The defining specification is the 55 target ports, each backed by a dedicated SATA channel and 256 MB of buffer memory to sustain throughput. This capacity determines whether a single run can meet the batch size required for production, education or government deployments.
| Brand | Systor |
|---|---|
| Model | SYS-CFD-55 |
| Type | Compact Flash Duplicator |
| Target | 1 to 55 |
| Buffer Memory | 256 MB |
| Supported Media | Compact Flash Type 1, 2, Microdrives |
| Language Support | English, Japanese, Spanish, Portuguese |
| Display | LCD Screen |
| Operating Type | Standalone |
| Connector | SATA |
| Panel Color | Black |
| Load Type | Slot |
| Key Features | Synchronous or Asynchronous mode |
| Features | Quick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats |
| Power Supply | 115/230 V, 50/60 Hz, 400 W |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The unit uses a 400 W supply rated for 115/230 V at 50/60 Hz; actual draw depends on how many of the 55 slots are active.
You need one Compact Flash Type 1, Type 2 or Microdrive as the source and up to 55 matching target cards inserted in the slots.
The duplicator uses a SATA interface internally but the 55 slots accept Compact Flash Type 1, Type 2 and Microdrive cards directly.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?