אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black standalone CF duplicator with 55 front slots and LCD display

Systor

Systor SYS-CFD-55 CF Duplicator 1 to 55 Targets

SKU CH-EK0J-RYYVW

Standalone CF duplicator copies one source to 55 targets at up to 2GB/min with bit-by-bit verification

  • TypeCompact Flash Duplicator
  • Target1 to 55
  • Buffer Memory256 MB
  • Supported MediaCompact Flash Type 1, 2, Microdrives
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 55

  • Standalone operation copies cards without a computer
  • 55 independent slots duplicate simultaneously with no speed loss
  • Bit-by-bit compare verifies every copy for data integrity
  • Asynchronous mode lets you load and unload cards while copying continues
  • 256 MB buffer and SATA interface sustain up to 2 GB/min transfer speed

Systor SYS-CFD-55 CF Duplicator

The Systor SYS-CFD-55 is a standalone Compact Flash duplicator that copies one source card to as many as 55 targets simultaneously. It operates without a host computer and uses an LCD screen with four control buttons for job selection and status feedback. The unit supports Compact Flash Type 1, Type 2 and Microdrive media in a slot-load design.

High-volume CF duplication for standalone workflows

This duplicator suits organisations that need to clone large batches of Compact Flash cards quickly and without software installation. Asynchronous mode lets each channel load, copy and unload independently so operators can swap cards without pausing other slots. Buyers who work with SD, CFast or other memory formats, or who require a PC-connected imaging station, will not be served by this device.

55 independent target slots with SATA connectivity

The defining specification is the 55 target ports, each backed by a dedicated SATA channel and 256 MB of buffer memory to sustain throughput. This capacity determines whether a single run can meet the batch size required for production, education or government deployments.

נקודות עיקריות

  • Standalone operation copies cards without a computer
  • 55 independent slots duplicate simultaneously with no speed loss
  • Bit-by-bit compare verifies every copy for data integrity
  • Asynchronous mode lets you load and unload cards while copying continues
  • 256 MB buffer and SATA interface sustain up to 2 GB/min transfer speed

מפרט טכני

BrandSystor
ModelSYS-CFD-55
TypeCompact Flash Duplicator
Target1 to 55
Buffer Memory256 MB
Supported MediaCompact Flash Type 1, 2, Microdrives
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

גרסאות נוספות של דגם זה

5 נוספים באותה הסדרה

אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.

שאלות על הפריט הזה

How much power does the 400 W supply draw when the duplicator runs all day?

The unit uses a 400 W supply rated for 115/230 V at 50/60 Hz; actual draw depends on how many of the 55 slots are active.

What source card and target cards must I already have to start copying?

You need one Compact Flash Type 1, Type 2 or Microdrive as the source and up to 55 matching target cards inserted in the slots.

Will the SATA connector work with my older CF cards?

The duplicator uses a SATA interface internally but the 55 slots accept Compact Flash Type 1, Type 2 and Microdrive cards directly.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.