暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone Compact Flash duplicator with LCD screen and 23 card slots

Systor

Systor 1-23 CF Duplicator 256MB LCD Black

SKU CH-ZVGB-5GJZC

Standalone Compact Flash duplicator copies one card to 23 targets simultaneously with 256 MB buffer and LCD control

  • TypeCompact Flash Duplicator
  • Target1 to 23
  • Buffer Memory256 MB
  • Supported MediaCompact Flash Type 1, 2, Microdrives
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 23

  • Standalone duplicator copies CF cards without a computer
  • 256 MB buffer sustains speed across 23 targets
  • Asynchronous mode lets each channel load and copy independently
  • LCD with four-button control shows status at a glance
  • Bit-by-bit compare verifies every copy automatically

Standalone CF Duplicator

This Systor duplicator copies Compact Flash Type 1, Type 2 and Microdrive cards without a host computer. It offers 1 source and up to 23 target slots driven by a 256 MB buffer. The unit operates from 115 or 230 V mains power and uses a SATA internal connector. A four-button LCD interface controls synchronous or asynchronous duplication modes.

For high-volume CF workflows

Organisations that need to duplicate many CF cards at once — such as industrial imaging, legacy embedded systems or archival projects — will benefit from the independent channel design that maintains speed across all targets. Buyers who require duplication of SD, microSD, CFast or any non-CF media should look at a different duplicator because this unit only accepts Compact Flash formats.

256 MB buffer and 23 targets

The 256 MB buffer handles whole-media bit-by-bit copies of FAT16, FAT32, NTFS and Linux EXT2/3/4 partitions without speed loss across all 23 ports. Asynchronous mode lets each channel load, unload and copy independently so large batches finish without waiting for the slowest card. The duplicator reaches its limit when a job requires more than 23 simultaneous targets or media outside the Compact Flash specification.

特長

  • Standalone duplicator copies CF cards without a computer
  • 256 MB buffer sustains speed across 23 targets
  • Asynchronous mode lets each channel load and copy independently
  • LCD with four-button control shows status at a glance
  • Bit-by-bit compare verifies every copy automatically

仕様

TypeCompact Flash Duplicator
Target1 to 23
Buffer Memory256 MB
Supported MediaCompact Flash Type 1, 2, Microdrives
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 250 W

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the duplicator need a computer with a SATA port to operate?

No, the unit runs in standalone mode and copies cards without any host computer.

Can I mix older Compact Flash Type 1 and Microdrive cards in the same copy job?

Yes, each of the 23 slots works independently so different supported media types can be duplicated together.

How do I confirm every copy is bit-for-bit identical to the source?

The built-in compare function verifies each target against the source and reports the result on the LCD.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。