暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone CF duplicator with LCD screen and 95 card slots

Systor

Systor 1 to 95 CF Duplicator 256 MB Buffer

SKU CH-H66Y-GYQMN

Standalone CF duplicator copies one card to up to 95 targets simultaneously with 256 MB buffer and asynchronous operation

  • TypeCompact Flash Duplicator
  • Target1 to 95
  • Buffer Memory256 MB
  • Supported MediaCompact Flash Type 1, 2, Microdrives
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 95

  • Standalone operation copies CF cards without a computer
  • 256 MB buffer sustains high-speed transfers across all channels
  • Asynchronous mode lets each slot load, copy and unload independently
  • Supports 1 to 95 targets for high-volume duplication
  • LCD screen with four-button control simplifies job setup

Standalone CF Duplicator for 1 to 95 Targets

This Systor unit duplicates Compact Flash cards without a host computer. It supports Type 1, Type 2 and Microdrive media in synchronous or asynchronous modes. The 256 MB buffer and independent channels keep copy speed consistent across all targets. Quick copy handles FAT16, FAT32, NTFS and Linux EXT2/3/4 while whole-media copy covers every format.

Check Power and Media Compatibility Before Ordering

The duplicator runs on 115/230 V at 50/60 Hz with a 250 W supply, so verify your mains voltage and outlet type. It accepts only Compact Flash cards through slot-load ports; other card formats will not fit. Operation is standalone via the LCD and four-button panel, requiring no software installation or SATA host connection.

Thermals Noise and Power in Normal Use

The 250 W power rating defines maximum draw during full-load duplication across all 95 slots. Standalone operation means no host-system fan noise adds to the unit. The LCD display and button interface consume minimal power when idle. Expect the internal cooling to manage heat from sustained asynchronous copy sessions across multiple channels.

特長

  • Standalone operation copies CF cards without a computer
  • 256 MB buffer sustains high-speed transfers across all channels
  • Asynchronous mode lets each slot load, copy and unload independently
  • Supports 1 to 95 targets for high-volume duplication
  • LCD screen with four-button control simplifies job setup

仕様

TypeCompact Flash Duplicator
Target1 to 95
Buffer Memory256 MB
Supported MediaCompact Flash Type 1, 2, Microdrives
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 250 W

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the duplicator ship with CompactFlash cards or do I need to supply my own?

The unit is a standalone duplicator only; source and target CompactFlash cards must be purchased separately.

Should I choose the synchronous or asynchronous mode for a 95-target job?

Asynchronous mode lets each of the 95 channels load, unload and copy independently so the job finishes without waiting for the slowest slot.

What does the 256 MB buffer actually do during a copy?

It caches data from the source card so every target channel receives a steady stream at full speed without host-computer bottlenecks.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。