نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black standalone CF duplicator with LCD screen and 95 card slots

Systor

Systor 1 to 95 CF Duplicator 256 MB Buffer

SKU CH-H66Y-GYQMN

Standalone CF duplicator copies one card to up to 95 targets simultaneously with 256 MB buffer and asynchronous operation

  • TypeCompact Flash Duplicator
  • Target1 to 95
  • Buffer Memory256 MB
  • Supported MediaCompact Flash Type 1, 2, Microdrives
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 95

  • Standalone operation copies CF cards without a computer
  • 256 MB buffer sustains high-speed transfers across all channels
  • Asynchronous mode lets each slot load, copy and unload independently
  • Supports 1 to 95 targets for high-volume duplication
  • LCD screen with four-button control simplifies job setup

Standalone CF Duplicator for 1 to 95 Targets

This Systor unit duplicates Compact Flash cards without a host computer. It supports Type 1, Type 2 and Microdrive media in synchronous or asynchronous modes. The 256 MB buffer and independent channels keep copy speed consistent across all targets. Quick copy handles FAT16, FAT32, NTFS and Linux EXT2/3/4 while whole-media copy covers every format.

Check Power and Media Compatibility Before Ordering

The duplicator runs on 115/230 V at 50/60 Hz with a 250 W supply, so verify your mains voltage and outlet type. It accepts only Compact Flash cards through slot-load ports; other card formats will not fit. Operation is standalone via the LCD and four-button panel, requiring no software installation or SATA host connection.

Thermals Noise and Power in Normal Use

The 250 W power rating defines maximum draw during full-load duplication across all 95 slots. Standalone operation means no host-system fan noise adds to the unit. The LCD display and button interface consume minimal power when idle. Expect the internal cooling to manage heat from sustained asynchronous copy sessions across multiple channels.

أبرز المميزات

  • Standalone operation copies CF cards without a computer
  • 256 MB buffer sustains high-speed transfers across all channels
  • Asynchronous mode lets each slot load, copy and unload independently
  • Supports 1 to 95 targets for high-volume duplication
  • LCD screen with four-button control simplifies job setup

المواصفات

TypeCompact Flash Duplicator
Target1 to 95
Buffer Memory256 MB
Supported MediaCompact Flash Type 1, 2, Microdrives
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 250 W

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does the duplicator ship with CompactFlash cards or do I need to supply my own?

The unit is a standalone duplicator only; source and target CompactFlash cards must be purchased separately.

Should I choose the synchronous or asynchronous mode for a 95-target job?

Asynchronous mode lets each of the 95 channels load, unload and copy independently so the job finishes without waiting for the slowest slot.

What does the 256 MB buffer actually do during a copy?

It caches data from the source card so every target channel receives a steady stream at full speed without host-computer bottlenecks.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.