نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black standalone CF card duplicator with LCD screen and 47 slots

Systor

Systor 1 to 47 CF Card Duplicator

SKU CH-VEQ6-FK92N

Standalone duplicator copies one Compact Flash card to 47 targets simultaneously with 256 MB buffer and LCD control

  • TypeCompact Flash Duplicator
  • Target1 to 47
  • Buffer Memory256 MB
  • Supported MediaCompact Flash Type 1, 2, Microdrives
  • Language SupportEnglish, Japanese, Spanish, Portuguese
  • DisplayLCD Screen

Target 1 to 47

  • Standalone operation requires no computer
  • Copies up to 47 cards simultaneously
  • Asynchronous mode keeps every channel running
  • 256 MB buffer ensures steady throughput
  • LCD screen with four-button control

Standalone CF Duplicator

The Systor unit copies one Compact Flash card to as many as 47 targets in a single operation. It runs without a host computer, using a built-in LCD screen and four control buttons. A 256 MB buffer supports synchronous and asynchronous duplication modes. Power is drawn from a 115/230 V, 50/60 Hz, 400 W supply.

High-volume CF workflows

Organisations that need to replicate large batches of Compact Flash Type 1, Type 2 or Microdrive media will benefit from the independent channel architecture. Users who work with SD cards, USB drives or other non-CF formats must choose a different duplicator. The standalone design also means no software installation is required on site.

1-to-47 target capacity

The maximum of 47 simultaneous target slots defines the throughput ceiling for each duplication run. Buyers planning larger batch sizes will need multiple units or a higher-capacity system. This figure is the primary constraint when sizing the duplicator for production workloads.

أبرز المميزات

  • Standalone operation requires no computer
  • Copies up to 47 cards simultaneously
  • Asynchronous mode keeps every channel running
  • 256 MB buffer ensures steady throughput
  • LCD screen with four-button control

المواصفات

TypeCompact Flash Duplicator
Target1 to 47
Buffer Memory256 MB
Supported MediaCompact Flash Type 1, 2, Microdrives
Language SupportEnglish, Japanese, Spanish, Portuguese
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Key FeaturesSynchronous or Asynchronous mode
FeaturesQuick Copy: FAT16/32, NTFS, Linux(EXT2/EXT3/EXT4) Whole Media Copy: All Formats
Power Supply115/230 V, 50/60 Hz, 400 W

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What does the SATA connector limit the copy speed to in practice?

The SATA connector links each slot to the internal controller, so the practical throughput is capped by the SATA interface on the duplicator rather than the card's own rating.

What physical space and power does the unit need to sit and run?

It requires a standard 115 V or 230 V mains supply at 50 or 60 Hz drawing up to 400 W, plus enough bench clearance for 47 front-loading CF slots and the LCD panel.

How do I start a copy job and what step do users often miss?

Insert the source card in the first slot, load target cards in the remaining slots, select Quick Copy or Whole Media mode via the four-button LCD menu, then press Start; the step often missed is confirming the bit-by-bit compare finishes before removing cards.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.