Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular M.2 2280 SSD with a thin graphene heat dissipation label

Team Group

Team Group MP44Q 1TB M.2 2280 internal SSD TM8FFD001T0C101

SKU CH-P72X-KMAQB MPN TM8FFD001T0C101

1 TB PCIe 4.0 M.2 2280 SSD with graphene heat label reaches 7400 MB/s read and 6200 MB/s write

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity1TB
  • Memory ComponentsQLC
  • InterfacePCIe 4.0 x4 with NVMe

Options 1TB

  • Up to 7400 MB/s sequential read speeds with PCIe 4.0 x4 interface
  • Up to 6200 MB/s sequential write speeds using SLC caching technology
  • 500 TBW endurance rating backed by 1,600,000 hours MTBF
  • Graphene heat dissipation label under 1mm for thermal management
  • S.M.A.R.T. monitoring software enables drive health tracking

Team Group MP44Q 1TB M.2 2280 SSD

The Team Group MP44Q 1TB is an internal M.2 2280 solid-state drive using a PCIe 4.0 x4 interface with NVMe 1.4. It employs 3D QLC NAND and a graphene heat dissipation label. Sequential read reaches up to 7400 MBps and write up to 6200 MBps. It targets consumers wanting fast capacity expansion.

Ideal for laptop, desktop.

This drive suits users adding high-speed storage to Windows 11, 10, 8.1, 8, 7 or Linux 2.6.33 systems. The QLC design and 500 TBW rating make it a good fit for general workloads and large file storage. Users with sustained heavy write workloads or enterprise durability needs should consider drives with higher endurance ratings.

PCIe 4.0 x4 NVMe 1.4 interface decides compatibility

The drive requires an M.2 slot wired for PCIe 4.0 x4 with NVMe support to deliver its rated performance. Older slots limited to PCIe 3.0 will reduce maximum throughput. Verify your motherboard or device manual confirms NVMe 1.4 operation before purchase.

Priekšrocības

  • Up to 7400 MB/s sequential read speeds with PCIe 4.0 x4 interface
  • Up to 6200 MB/s sequential write speeds using SLC caching technology
  • 500 TBW endurance rating backed by 1,600,000 hours MTBF
  • Graphene heat dissipation label under 1mm for thermal management
  • S.M.A.R.T. monitoring software enables drive health tracking

Specifikācijas

BrandTeam Group
SeriesMP44Q
ModelTM8FFD001T0C101
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity1TB
Memory ComponentsQLC
InterfacePCIe 4.0 x4 with NVMe
ProtocolNVMe 1.4
CacheNo DRAM (HMB)
Max Sequential ReadUp to 7400 MBps
Max Sequential WriteUp to 6200 MBps
Terabytes Written (TBW)500TB
MTBF1,600,000 hours
HeatSinkwith HeatSink
FeaturesCompatible with Intel and AMD platforms and has one of the foll owing operating systems:
Windows 11 / 10 / 8.1 / 8 / 7 / Vista or later
Linux 2.6.33 or later
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Operating HumidityRH 90% under 40°C (operational)
Max Shock Resistance1,500G/0.5ms
Max Vibration Resistance80Hz~2,000Hz/20G
Height3.7mm
Width22mm
Depth80mm
Weight7g
Sūtījuma svars0.02 kg
Sūtījuma izmēri127 × 99 × 2 mm

Citas šī modeļa versijas

Vēl 2 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What M.2 slot length and keying does the TM8FFD001T0C101 require?

The TM8FFD001T0C101 uses the M.2 2280 form factor and connects via a PCIe 4.0 x4 interface with NVMe 1.4 protocol, so it needs an M-keyed slot that accepts 80 mm modules.

What is the correct way to install the graphene heat dissipation label on the MP44Q?

Peel the protective film, align the label with the controller and NAND packages on the PCB, then press firmly; the label is less than 1 mm thick so it will not interfere with motherboard heatsinks or the retention screw.

How can I check the remaining lifespan of the 1 TB QLC drive?

Use the exclusive S.M.A.R.T. monitoring software to view the percentage of the 500 TBW endurance rating that has been consumed and the current media health status.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.