Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two black square thermal pads 100 by 100 millimetres 2.0 millimetres thick

Thermal Grizzly

Thermal Grizzly Minus Pad Basic 2-Pack 100x100x2.0mm

SKU CH-JN1S-FY3YR

Two 100 x 100 mm non-conductive thermal pads, 2.0 mm thick, for SSDs, GPUs and other electronics

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Electrically non-conductive protection prevents shorts on sensitive electronics
  • 100 x 100 mm size fits SSDs, GPU coolers and memory modules
  • 0 mm thickness bridges gaps between components and heatsinks
  • Good thermal conductivity moves heat away from high-load parts
  • Excellent price-performance ratio delivers reliable cooling at low cost

Thermal pad for SSDs and GPUs

Thermal Grizzly Minus Pad Basic comes as a two-pack of 100 x 100 mm black pads, each 2.0 mm thick. The electrically non-conductive material fills gaps between components and heatsinks. Good thermal conductivity helps transfer heat away from SSDs, GPU coolers, voltage regulators and memory modules. Easy handling makes installation straightforward for system builders.

Suits builds needing simple gap filling

These pads work well for users who want a non-conductive interface with good thermal conductivity and an excellent price-performance ratio. Builders who need higher compressibility or the highest possible thermal conductivity should look at the Advance or Pro series instead. The Basic series offers slightly lower compressibility, so it is less suited for uneven surfaces that require very soft pads.

2.0 mm thickness decides fit

The 2.0 mm dimension determines whether the pad bridges the specific gap in your SSD, GPU or VRM assembly. Measure the clearance before ordering; a thicker or thinner pad will not compress enough or may over-compress. The 100 x 100 mm sheet size lets you cut multiple pieces for different components.

Priekšrocības

  • Electrically non-conductive protection prevents shorts on sensitive electronics
  • 100 x 100 mm size fits SSDs, GPU coolers and memory modules
  • 0 mm thickness bridges gaps between components and heatsinks
  • Good thermal conductivity moves heat away from high-load parts
  • Excellent price-performance ratio delivers reliable cooling at low cost

Specifikācijas

BrandThermal Grizzly
ModelTG-MP-B-100-100-20-2
Part NumberTG-MP-B-100-100-20-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Jautājumi par šo preci

Will the 2.0 mm thickness work with the existing heatsink on my M.2 SSD?

The pad is 2.0 mm thick; measure the gap between your SSD and heatsink before installing to confirm fit.

How can I verify the pad is making proper contact after installation?

Check that the pad compresses evenly across the 100 x 100 mm surface and that component temperatures drop under load.

Does the 2-pack include any adhesive or tools, or must I supply them?

The pack contains two 100 x 100 mm pads only; no adhesive or tools are included.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.