Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two black square thermal pads 100 by 100 millimetres 2.0 millimetres thick

Thermal Grizzly

Thermal Grizzly Minus Pad Basic 2-Pack 100x100x2.0mm

SKU CH-JN1S-FY3YR

Two 100 x 100 mm non-conductive thermal pads, 2.0 mm thick, for SSDs, GPUs and other electronics

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Electrically non-conductive protection prevents shorts on sensitive electronics
  • 100 x 100 mm size fits SSDs, GPU coolers and memory modules
  • 0 mm thickness bridges gaps between components and heatsinks
  • Good thermal conductivity moves heat away from high-load parts
  • Excellent price-performance ratio delivers reliable cooling at low cost

Thermal pad for SSDs and GPUs

Thermal Grizzly Minus Pad Basic comes as a two-pack of 100 x 100 mm black pads, each 2.0 mm thick. The electrically non-conductive material fills gaps between components and heatsinks. Good thermal conductivity helps transfer heat away from SSDs, GPU coolers, voltage regulators and memory modules. Easy handling makes installation straightforward for system builders.

Suits builds needing simple gap filling

These pads work well for users who want a non-conductive interface with good thermal conductivity and an excellent price-performance ratio. Builders who need higher compressibility or the highest possible thermal conductivity should look at the Advance or Pro series instead. The Basic series offers slightly lower compressibility, so it is less suited for uneven surfaces that require very soft pads.

2.0 mm thickness decides fit

The 2.0 mm dimension determines whether the pad bridges the specific gap in your SSD, GPU or VRM assembly. Measure the clearance before ordering; a thicker or thinner pad will not compress enough or may over-compress. The 100 x 100 mm sheet size lets you cut multiple pieces for different components.

Pluspunten

  • Electrically non-conductive protection prevents shorts on sensitive electronics
  • 100 x 100 mm size fits SSDs, GPU coolers and memory modules
  • 0 mm thickness bridges gaps between components and heatsinks
  • Good thermal conductivity moves heat away from high-load parts
  • Excellent price-performance ratio delivers reliable cooling at low cost

Specificaties

BrandThermal Grizzly
ModelTG-MP-B-100-100-20-2
Part NumberTG-MP-B-100-100-20-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Vragen over dit artikel

Will the 2.0 mm thickness work with the existing heatsink on my M.2 SSD?

The pad is 2.0 mm thick; measure the gap between your SSD and heatsink before installing to confirm fit.

How can I verify the pad is making proper contact after installation?

Check that the pad compresses evenly across the 100 x 100 mm surface and that component temperatures drop under load.

Does the 2-pack include any adhesive or tools, or must I supply them?

The pack contains two 100 x 100 mm pads only; no adhesive or tools are included.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.