Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Three black 120mm ARGB case fans with luminous side frames, 25mm thick, hydraulic bearing, PWM 500-2000 RPM, 5V 3-pin ARGB connectors

Thermaltake

Thermaltake CL-F210-PL12SW-A 120mm case fan 3-pack

SKU CH-KW66-9YF1C MPN CL-F210-PL12SW-A

Three 120 mm PWM fans with hydraulic bearings deliver up to 59.34 CFM airflow and 2.86 mm-H₂O static pressure at 25.7 dB-A, plus 5 V ARGB sync and MagForce 2.0 magnetic mounting

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • RPMPWM 500 ~ 2000 R.P.M
  • Quiet operation at 25.7 dB-A per fan
  • High static pressure of 2.86 mm-H2O for radiators
  • 5V 3-pin ARGB sync with motherboard software
  • MagForce 2.0 magnetic mounting for easy installation
  • Nine LCP blades reduce vibration at high speed

Three-fan ARGB pack

This three-fan kit delivers 120 mm cooling with addressable RGB lighting for builders who want coordinated illumination across intake or exhaust positions. Each unit uses a hydraulic bearing and nine liquid-crystal-polymer blades to balance airflow and noise. The pack suits mid-tower and full-tower cases that have multiple 120 mm mounting points.

MagForce 2.0 mounting and 5 V ARGB sync

MagForce 2.0 doubles the contact-pad area on the pogo-pin frame so fans snap together or onto a compatible radiator without screws, saving time during builds or cleaning. A 4-pin PWM lead handles speed control from 500 to 2000 RPM while a separate 5 V 3-pin header connects to motherboard ARGB software for synchronised colour effects. The 25 mm thickness fits standard fan bays and most radiator stacks.

Upgrade from basic fixed-speed or single-colour fans

The hydraulic bearing and 25.7 dB-A rating make the jump worthwhile when quieter operation matters more than the cheapest option. Builders who need 59.34 CFM and 2.86 mm-H2O static pressure per fan for dense radiator fins or restrictive mesh panels will notice the difference. If your board lacks a 5 V ARGB header or you only need one or two fans, a smaller kit or non-RGB model may fit better.

Priekšrocības

  • Quiet operation at 25.7 dB-A per fan
  • High static pressure of 2.86 mm-H2O for radiators
  • 5V 3-pin ARGB sync with motherboard software
  • MagForce 2.0 magnetic mounting for easy installation
  • Nine LCP blades reduce vibration at high speed

Specifikācijas

BrandThermaltake
ModelCL-F210-PL12SW-A
Fan Counts3 Fans
TypeCase Fan
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPMPWM 500 ~ 2000 R.P.M
Air Flow59.34 CFM (one fan)
Noise Level25.7 dB-A (one fan)
Power Connector2510-4 Pin
5V ARGB header-3Pin
ColorBlack
LEDARGB
Sūtījuma svars0.89 kg
Sūtījuma izmēri155 × 140 × 89 mm

Jautājumi par šo preci

Does the 2510 4-pin PWM connector let the motherboard run the fan down to 500 RPM?

Yes, the 2510 4-pin PWM connector supports the full 500 to 2000 RPM range so the motherboard can control speed across the entire curve.

Will the 25 mm thick 120 mm frame clear a standard 120 mm radiator or case mount?

The 120 mm by 25 mm dimensions match the standard 120 mm mounting pattern used on cases and radiators.

How do I connect the 5 V 3-pin ARGB header so the lighting syncs in motherboard software?

Plug the 5 V 3-pin ARGB header into a 5 V addressable RGB header on the motherboard, then enable the device in the board's lighting utility.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.