Thermaltake
Thermaltake CL-F210-PL12SW-A 120mm case fan 3-pack
Three 120 mm PWM fans with hydraulic bearings deliver up to 59.34 CFM airflow and 2.86 mm-H₂O static pressure at 25.7 dB-A, plus 5 V ARGB sync and MagForce 2.0 magnetic mounting
- Fan Counts3 Fans
- TypeCase Fan
- Fan Size120mm
- Fan Thickness25mm
- Bearing TypeHydraulic Bearing
- RPMPWM 500 ~ 2000 R.P.M
- Quiet operation at 25.7 dB-A per fan
- High static pressure of 2.86 mm-H2O for radiators
- 5V 3-pin ARGB sync with motherboard software
- MagForce 2.0 magnetic mounting for easy installation
- Nine LCP blades reduce vibration at high speed
Three-fan ARGB pack
This three-fan kit delivers 120 mm cooling with addressable RGB lighting for builders who want coordinated illumination across intake or exhaust positions. Each unit uses a hydraulic bearing and nine liquid-crystal-polymer blades to balance airflow and noise. The pack suits mid-tower and full-tower cases that have multiple 120 mm mounting points.
MagForce 2.0 mounting and 5 V ARGB sync
MagForce 2.0 doubles the contact-pad area on the pogo-pin frame so fans snap together or onto a compatible radiator without screws, saving time during builds or cleaning. A 4-pin PWM lead handles speed control from 500 to 2000 RPM while a separate 5 V 3-pin header connects to motherboard ARGB software for synchronised colour effects. The 25 mm thickness fits standard fan bays and most radiator stacks.
Upgrade from basic fixed-speed or single-colour fans
The hydraulic bearing and 25.7 dB-A rating make the jump worthwhile when quieter operation matters more than the cheapest option. Builders who need 59.34 CFM and 2.86 mm-H2O static pressure per fan for dense radiator fins or restrictive mesh panels will notice the difference. If your board lacks a 5 V ARGB header or you only need one or two fans, a smaller kit or non-RGB model may fit better.
Puntos fuertes
- Quiet operation at 25.7 dB-A per fan
- High static pressure of 2.86 mm-H2O for radiators
- 5V 3-pin ARGB sync with motherboard software
- MagForce 2.0 magnetic mounting for easy installation
- Nine LCP blades reduce vibration at high speed
Especificaciones
| Brand | Thermaltake |
|---|---|
| Model | CL-F210-PL12SW-A |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | PWM 500 ~ 2000 R.P.M |
| Air Flow | 59.34 CFM (one fan) |
| Noise Level | 25.7 dB-A (one fan) |
| Power Connector | 2510-4 Pin 5V ARGB header-3Pin |
| Color | Black |
| LED | ARGB |
| Peso de envío | 0.89 kg |
| Dimensiones del paquete | 155 × 140 × 89 mm |
Preguntas sobre este artículo
Does the 2510 4-pin PWM connector let the motherboard run the fan down to 500 RPM?
Yes, the 2510 4-pin PWM connector supports the full 500 to 2000 RPM range so the motherboard can control speed across the entire curve.
Will the 25 mm thick 120 mm frame clear a standard 120 mm radiator or case mount?
The 120 mm by 25 mm dimensions match the standard 120 mm mounting pattern used on cases and radiators.
How do I connect the 5 V 3-pin ARGB header so the lighting syncs in motherboard software?
Plug the 5 V 3-pin ARGB header into a 5 V addressable RGB header on the motherboard, then enable the device in the board's lighting utility.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001048BTC
En stock