Timetec
Timetec 512GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- Consumer
60,99 $
0.00078751BTC
Krājumā
Timetec
Timetec 35TT2280SATA-1TB 1TB SATA internal SSD
M.2 2280 SATA III 6Gb/s 1TB 3D NAND SSD with 530 MB/s read and 480 MB/s write speeds for desktops and laptops
- Max Sequential ReadUp to 530 MBps
- Max Sequential WriteUp to 480 MBps
- Form FactorM.2 2280
- Capacity1TB
- InterfaceSATA III
- Memory Components3D NAND
Style M.2 SATA
- M.2 SATA
- M.2 Pinnacle
Options 1TB (1 Pack)
- Up to 530 MB/s sequential read speeds data from spec sheet
- Up to 480 MB/s sequential write speeds data from spec sheet
- M.2 2280 form factor fits standard SATA slots confirmed by spec sheet
- 3D NAND with SLC cache boosts performance and endurance noted in supplier highlights
- 5 million hours MTBF indicates high reliability from manufacturer highlights
1TB SATA M.2 2280 internal SSD
The Timetec 35TT2280SATA-1TB is a 1TB internal solid-state drive that uses the SATA III 6Gb/s interface in the M.2 2280 form factor. It is built with 3D NAND flash and an SLC cache to accelerate everyday workloads on compatible desktops and laptops.
Build integration with M.2 SATA slot
The drive fits a standard M.2 2280 slot wired for SATA, not PCIe, and works with Windows 7 through 11 plus Linux 2.6.33 or later. No cables, screws or brackets are included, so the host system must provide the mounting hardware. Backward compatibility with SATA II and SATA I lets it drop into older platforms without changes.
Sustained performance and endurance
Sequential reads reach 530 MB/s and writes reach 480 MB/s, while the manufacturer rates the SLC cache burst at 550 MB/s read and 500 MB/s write. Endurance is specified at 512 TBW and the MTBF is 1500000 hours. S.M.A.R.T., TRIM, garbage collection, wear-leveling, ECC and power-saving features operate continuously to maintain consistency during extended use.
Priekšrocības
- Up to 530 MB/s sequential read speeds data from spec sheet
- Up to 480 MB/s sequential write speeds data from spec sheet
- M.2 2280 form factor fits standard SATA slots confirmed by spec sheet
- 3D NAND with SLC cache boosts performance and endurance noted in supplier highlights
- 5 million hours MTBF indicates high reliability from manufacturer highlights
Specifikācijas
| Max Sequential Read | Up to 530 MBps |
|---|---|
| Max Sequential Write | Up to 480 MBps |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Interface | SATA III |
| Memory Components | 3D NAND |
| Brand | Timetec |
| Model | 35TT2280SATA-1TB |
| Device Type | Internal Solid State Drive (SSD) |
Citas šī modeļa versijas
Vēl 5 šajā sērijā
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Timetec
Timetec 1TB M.2 2280 SATA Internal SSD
- Internal Solid Stat…
- Consumer
99,99 $
0.00129108BTC
Krājumā
Timetec
Timetec 128GB 10-pack 2.5" SATA internal SSD
- Internal Solid Stat…
- 2.5"
222,99 $
0.00287926BTC
Krājumā
Timetec
Timetec 128GB x10 M.2 2280 SATA internal SSD
- Internal Solid Stat…
- M.2 2280
244,99 $
0.00316332BTC
KrājumāJautājumi par šo preci
What sequential write speed should I expect during long, heavy writes?
The drive is rated for up to 480 MB/s sequential write; sustained workloads may run below that peak as the SLC cache fills.
How hot and loud does the drive get when running all day?
With no moving parts and low SATA III power draw, it stays silent and typically remains cool enough for passive airflow in a laptop or desktop.
What slot type must my motherboard or laptop already have for this drive to work?
It needs an M.2 2280 slot wired for SATA III 6 Gb/s; the drive is also backward compatible with SATA II 3 Gb/s and SATA I 1.5 Gb/s.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
