Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Timetec 1TB M.2 2280 SATA SSD green circuit board with gold connectors

Timetec

Timetec 35TT2280SATA-1TB 1TB SATA internal SSD

SKU CH-1DTK-Q03KD

M.2 2280 SATA III 6Gb/s 1TB 3D NAND SSD with 530 MB/s read and 480 MB/s write speeds for desktops and laptops

  • Max Sequential ReadUp to 530 MBps
  • Max Sequential WriteUp to 480 MBps
  • Form FactorM.2 2280
  • Capacity1TB
  • InterfaceSATA III
  • Memory Components3D NAND

Style M.2 SATA

Options 1TB (1 Pack)

  • Up to 530 MB/s sequential read speeds data from spec sheet
  • Up to 480 MB/s sequential write speeds data from spec sheet
  • M.2 2280 form factor fits standard SATA slots confirmed by spec sheet
  • 3D NAND with SLC cache boosts performance and endurance noted in supplier highlights
  • 5 million hours MTBF indicates high reliability from manufacturer highlights

1TB SATA M.2 2280 internal SSD

The Timetec 35TT2280SATA-1TB is a 1TB internal solid-state drive that uses the SATA III 6Gb/s interface in the M.2 2280 form factor. It is built with 3D NAND flash and an SLC cache to accelerate everyday workloads on compatible desktops and laptops.

Build integration with M.2 SATA slot

The drive fits a standard M.2 2280 slot wired for SATA, not PCIe, and works with Windows 7 through 11 plus Linux 2.6.33 or later. No cables, screws or brackets are included, so the host system must provide the mounting hardware. Backward compatibility with SATA II and SATA I lets it drop into older platforms without changes.

Sustained performance and endurance

Sequential reads reach 530 MB/s and writes reach 480 MB/s, while the manufacturer rates the SLC cache burst at 550 MB/s read and 500 MB/s write. Endurance is specified at 512 TBW and the MTBF is 1500000 hours. S.M.A.R.T., TRIM, garbage collection, wear-leveling, ECC and power-saving features operate continuously to maintain consistency during extended use.

I korthet

  • Up to 530 MB/s sequential read speeds data from spec sheet
  • Up to 480 MB/s sequential write speeds data from spec sheet
  • M.2 2280 form factor fits standard SATA slots confirmed by spec sheet
  • 3D NAND with SLC cache boosts performance and endurance noted in supplier highlights
  • 5 million hours MTBF indicates high reliability from manufacturer highlights

Specifikationer

Max Sequential ReadUp to 530 MBps
Max Sequential WriteUp to 480 MBps
Form FactorM.2 2280
Capacity1TB
InterfaceSATA III
Memory Components3D NAND
BrandTimetec
Model35TT2280SATA-1TB
Device TypeInternal Solid State Drive (SSD)

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What sequential write speed should I expect during long, heavy writes?

The drive is rated for up to 480 MB/s sequential write; sustained workloads may run below that peak as the SLC cache fills.

How hot and loud does the drive get when running all day?

With no moving parts and low SATA III power draw, it stays silent and typically remains cool enough for passive airflow in a laptop or desktop.

What slot type must my motherboard or laptop already have for this drive to work?

It needs an M.2 2280 slot wired for SATA III 6 Gb/s; the drive is also backward compatible with SATA II 3 Gb/s and SATA I 1.5 Gb/s.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.