Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular black ATX power supply, single 135mm fan, 165mm long, non-modular cables visible

TOPOWER

TOPOWER TOP-1600WM1 1600W mining hardware

SKU CH-H644-G804E MPN TOP-1600WM1

Delivers 1600 W to mining rigs with 16 PCIe 6+2P connectors for up to eight GPUs, active PFC and a 135 mm fan

  • TypeATX 12V / EPS 12V
  • Maximum Power1600 W
  • Fans1
  • PFCActive
  • Main Connector20+4 Pin
  • +12V RailsSingle
  • Delivers 1600 W for multi-GPU mining rigs
  • Wide 100 – 240 V input suits global mains
  • Single +12 V rail rated at 128 A feeds all cards
  • Sixteen PCI-E 6+2P connectors power up to eight GPUs
  • 135 mm fan and active PFC keep thermals in check

1600W Mining Power Supply

This TOPOWER TOP-1600WM1 unit delivers 1600 W for cryptocurrency mining rigs. It supports up to eight graphics cards for coins such as BTC, ETH, LTC and XMR. The single +12 V rail provides 128 A for stable GPU loads. Active PFC handles input from 100 to 240 V at 50 or 60 Hz.

Non-modular ATX Installation

The supply uses a fixed 20+4 pin main connector and sixteen 6+2P PCI-Express leads. Its 165 mm length fits standard ATX mining chassis. A single 135 mm fan cools the unit. Cable routing must account for all sixteen PCIe plugs and eight SATA connectors. Ensure the case has enough depth for the non-modular harness.

Pre-purchase Compatibility Checks

Verify the motherboard accepts a 20+4 pin ATX connector and that the chassis clears 165 mm depth. Confirm the AC supply operates within 100 to 240 V range. Count the required PCIe 6+2P connections for each GPU. Check that the single +12 V rail design matches the rig power distribution plan.

Priekšrocības

  • Delivers 1600 W for multi-GPU mining rigs
  • Wide 100 – 240 V input suits global mains
  • Single +12 V rail rated at 128 A feeds all cards
  • Sixteen PCI-E 6+2P connectors power up to eight GPUs
  • 135 mm fan and active PFC keep thermals in check

Specifikācijas

BrandTOPOWER
SeriesMINING
ModelTOP-1600WM1
TypeATX 12V / EPS 12V
Maximum Power1600 W
Fans1
PFCActive
Main Connector20+4 Pin
+12V RailsSingle
PCI-Express Connector16 x 6+2P
SATA Power Connector8
SLIReady
CrossFireReady
Max PSU Length165 mm
ModularNo
Efficiency> 85%
Over Voltage ProtectionYes
Overload ProtectionYes
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
Power Rating1600W
+3.3V Max. Current20A
+5V Max. Current20A
+12V1 Max. Current128A
-12V Max. Current0.5A
+5VSB Max. Current3A
12V Power Connector1 x 4+4 Pin ATX/EPS 12V
Peripheral Connector6
Fans Total Quantity1
Top Fans Size135mm

Jautājumi par šo preci

Will this power supply fit inside a standard ATX mining chassis?

The unit is 165 mm long and uses an ATX 12V form factor, so it fits most standard mining frames that accept ATX supplies.

Can I run eight graphics cards from the native connectors?

Yes, the supply provides sixteen 6+2-pin PCIe connectors, enough for eight dual-connector GPUs without adapters.

What AC voltage range does the unit accept for worldwide use?

The input range is 100 to 240 V at 50 or 60 Hz, so it works on mains power in most countries.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.