TP-Link
TP-Link EAP225 V3 AC1350 wireless router
A Wi-Fi 5 access point delivering up to 1.35 Gbps with MU-MIMO, mesh support, seamless roaming and PoE power
- WiFi GenerationWi-Fi 5
- Wireless StandardIEEE 802.11a / IEEE 802.11ac / IEEE 802.11b / IEEE 802.11g /
- Wireless Data RatesAC1350 / Up to 1.35Gbps
- Dual-band speeds up to 1.35 Gbps with MU-MIMO
- Flexible PoE power via 802.3af or passive PoE adapter
- Seamless roaming and Mesh WiFi across the network
- Centralised cloud management through Omada SDN platform
- Wi-Fi 5 wave 2 technology for simultaneous multi-device performance
EAP225 V3 AC1350 wireless access point
The TP-Link EAP225 V3 is a dual-band Wi-Fi 5 access point delivering up to 1350 Mbps aggregate throughput. It targets small to medium businesses that need reliable wireless coverage with centralised management. Power over Ethernet support simplifies placement where mains sockets are unavailable. The unit integrates with the Omada SDN platform for cloud or on-premises control.
Upgrade from standalone consumer routers
Businesses moving from consumer-grade routers gain seamless roaming, band steering and mesh capability across multiple EAP units. MU-MIMO serves several clients at once, reducing airtime contention in dense environments. The jump is worthwhile when you need a single management pane for multiple access points and consistent handoff as users move through the premises.
Check PoE infrastructure and controller version
Verify your switch or injector supplies 802.3af PoE or the included passive PoE adapter before ordering. For SDN features, confirm existing Omada controllers run a compatible firmware version; non-SDN controllers cannot manage this device. Ensure client devices support MU-MIMO to use the simultaneous-stream capability.
Priekšrocības
- Dual-band speeds up to 1.35 Gbps with MU-MIMO
- Flexible PoE power via 802.3af or passive PoE adapter
- Seamless roaming and Mesh WiFi across the network
- Centralised cloud management through Omada SDN platform
- Wi-Fi 5 wave 2 technology for simultaneous multi-device performance
Specifikācijas
| WiFi Generation | Wi-Fi 5 |
|---|---|
| Wireless Standard | IEEE 802.11a / IEEE 802.11ac / IEEE 802.11b / IEEE 802.11g / IEEE 802.11n |
| Wireless Data Rates | AC1350 / Up to 1.35Gbps |
Jautājumi par šo preci
What mounting hardware is included for the EAP225 ceiling or wall installation?
The EAP225 includes a mounting bracket and screw kit for ceiling or wall mounting, allowing secure attachment to standard junction boxes or direct surface mounting.
How is the EAP225 powered via PoE and which injector type is required?
Connect the EAP225 to an 802.3af PoE switch or use the supplied passive PoE injector; the Ethernet cable carries both data and power to the access point.
When should the PoE injector or switch port be checked or replaced for the EAP225?
Inspect the PoE injector or switch port if the EAP225 loses power intermittently or fails to power on, as injector failure is the most common maintenance point.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
