暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
White ceiling-mounted wireless access point, circular flat design

TP-Link

TP-Link EAP225 V3 AC1350 wireless router

SKU CH-B87D-F721C

A Wi-Fi 5 access point delivering up to 1.35 Gbps with MU-MIMO, mesh support, seamless roaming and PoE power

  • WiFi GenerationWi-Fi 5
  • Wireless StandardIEEE 802.11a / IEEE 802.11ac / IEEE 802.11b / IEEE 802.11g /
  • Wireless Data RatesAC1350 / Up to 1.35Gbps
  • Dual-band speeds up to 1.35 Gbps with MU-MIMO
  • Flexible PoE power via 802.3af or passive PoE adapter
  • Seamless roaming and Mesh WiFi across the network
  • Centralised cloud management through Omada SDN platform
  • Wi-Fi 5 wave 2 technology for simultaneous multi-device performance

EAP225 V3 AC1350 wireless access point

The TP-Link EAP225 V3 is a dual-band Wi-Fi 5 access point delivering up to 1350 Mbps aggregate throughput. It targets small to medium businesses that need reliable wireless coverage with centralised management. Power over Ethernet support simplifies placement where mains sockets are unavailable. The unit integrates with the Omada SDN platform for cloud or on-premises control.

Upgrade from standalone consumer routers

Businesses moving from consumer-grade routers gain seamless roaming, band steering and mesh capability across multiple EAP units. MU-MIMO serves several clients at once, reducing airtime contention in dense environments. The jump is worthwhile when you need a single management pane for multiple access points and consistent handoff as users move through the premises.

Check PoE infrastructure and controller version

Verify your switch or injector supplies 802.3af PoE or the included passive PoE adapter before ordering. For SDN features, confirm existing Omada controllers run a compatible firmware version; non-SDN controllers cannot manage this device. Ensure client devices support MU-MIMO to use the simultaneous-stream capability.

特長

  • Dual-band speeds up to 1.35 Gbps with MU-MIMO
  • Flexible PoE power via 802.3af or passive PoE adapter
  • Seamless roaming and Mesh WiFi across the network
  • Centralised cloud management through Omada SDN platform
  • Wi-Fi 5 wave 2 technology for simultaneous multi-device performance

仕様

WiFi GenerationWi-Fi 5
Wireless StandardIEEE 802.11a / IEEE 802.11ac / IEEE 802.11b / IEEE 802.11g / IEEE 802.11n
Wireless Data RatesAC1350 / Up to 1.35Gbps

この商品に関する質問

What mounting hardware is included for the EAP225 ceiling or wall installation?

The EAP225 includes a mounting bracket and screw kit for ceiling or wall mounting, allowing secure attachment to standard junction boxes or direct surface mounting.

How is the EAP225 powered via PoE and which injector type is required?

Connect the EAP225 to an 802.3af PoE switch or use the supplied passive PoE injector; the Ethernet cable carries both data and power to the access point.

When should the PoE injector or switch port be checked or replaced for the EAP225?

Inspect the PoE injector or switch port if the EAP225 loses power intermittently or fails to power on, as injector failure is the most common maintenance point.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。