Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black metal vertical wall-mount rack bracket with mounting hardware

Tripp Lite

Tripp Lite SRWALLBRKT4U 4U Vertical Wall-Mount Rack Bracket Server Accessory

SKU CH-DT10-R4ERH MPN SRWALLBRKT4U

A 4U vertical wall-mount bracket supports servers, switches or UPS units up to 175 lb and includes 12 M6 screws, washers and cage nuts

  • TypeTools and Hardware
  • ColorBlack
  • Supports servers, switches and UPS units in a compact vertical layout
  • Holds up to 175 lb for secure equipment mounting
  • Includes 12 M6 screws, washers and cage nuts for quick installation
  • RoHS certified and environmentally friendly construction
  • Fits standard 19.7" width with 7.7" depth and height

Vertical wall-mount bracket for 4U servers

The Tripp Lite SRWALLBRKT4U mounts a 4U rack device vertically on a wall, saving floor space in small rooms. It accepts servers, network switches or UPS units up to the rated capacity. The bracket ships with 12 M6 screws, 12 M6 cup washers, 12 M6 cage nuts and an installation guide. It is finished in black and weighs approximately 5.29 lb.

Load limit and physical envelope

The bracket supports a maximum load of 175 lb. Its own dimensions are 7.7 inches high, 19.7 inches wide and 7.7 inches deep. These figures define the clearance needed on the wall and the heaviest device the bracket can hold safely. Exceeding the load rating or mounting in a space smaller than the bracket footprint risks mechanical failure.

Four-U vertical form factor

This accessory is built only for 4U equipment mounted in a vertical orientation. It will not fit 1U, 2U, 3U or larger rack heights, nor horizontal wall-mount layouts. Buyers needing a different rack-unit height or a horizontal shelf must choose a different bracket. The RoHS-compliant construction and five-year limited warranty apply to this specific 4U vertical model.

Priekšrocības

  • Supports servers, switches and UPS units in a compact vertical layout
  • Holds up to 175 lb for secure equipment mounting
  • Includes 12 M6 screws, washers and cage nuts for quick installation
  • RoHS certified and environmentally friendly construction
  • Fits standard 19.7" width with 7.7" depth and height

Specifikācijas

BrandTRIPP LITE
TypeTools and Hardware
ColorBlack
Sūtījuma svars3.10 kg
Sūtījuma izmēri711 × 457 × 337 mm

Jautājumi par šo preci

Should I pick the 4U bracket or a different height for my server?

The SRWALLBRKT4U provides exactly 4U of vertical space, holding equipment up to 175 lb. Choose it when your server, switch or UPS fits within that height and weight; otherwise select a taller or shorter bracket.

What does the 175 lb load rating mean once the bracket is on the wall?

It means the mounted assembly — bracket plus server, switch or UPS — must not exceed 175 lb. Verify the combined weight of your device and any rails before installation.

How does the wall-mount interface limit what I can install?

The bracket mounts directly to a wall using the supplied 12 M6 screws, washers and cage nuts, giving a fixed 19.7 in width and 7.7 in depth. Equipment must fit those dimensions and the 4U height.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.