Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black metal vertical wall-mount rack bracket with mounting hardware

Tripp Lite

Tripp Lite SRWALLBRKT4U 4U Vertical Wall-Mount Rack Bracket Server Accessory

SKU CH-DT10-R4ERH MPN SRWALLBRKT4U

A 4U vertical wall-mount bracket supports servers, switches or UPS units up to 175 lb and includes 12 M6 screws, washers and cage nuts

  • TypeTools and Hardware
  • ColorBlack
  • Supports servers, switches and UPS units in a compact vertical layout
  • Holds up to 175 lb for secure equipment mounting
  • Includes 12 M6 screws, washers and cage nuts for quick installation
  • RoHS certified and environmentally friendly construction
  • Fits standard 19.7" width with 7.7" depth and height

Vertical wall-mount bracket for 4U servers

The Tripp Lite SRWALLBRKT4U mounts a 4U rack device vertically on a wall, saving floor space in small rooms. It accepts servers, network switches or UPS units up to the rated capacity. The bracket ships with 12 M6 screws, 12 M6 cup washers, 12 M6 cage nuts and an installation guide. It is finished in black and weighs approximately 5.29 lb.

Load limit and physical envelope

The bracket supports a maximum load of 175 lb. Its own dimensions are 7.7 inches high, 19.7 inches wide and 7.7 inches deep. These figures define the clearance needed on the wall and the heaviest device the bracket can hold safely. Exceeding the load rating or mounting in a space smaller than the bracket footprint risks mechanical failure.

Four-U vertical form factor

This accessory is built only for 4U equipment mounted in a vertical orientation. It will not fit 1U, 2U, 3U or larger rack heights, nor horizontal wall-mount layouts. Buyers needing a different rack-unit height or a horizontal shelf must choose a different bracket. The RoHS-compliant construction and five-year limited warranty apply to this specific 4U vertical model.

Puncte forte

  • Supports servers, switches and UPS units in a compact vertical layout
  • Holds up to 175 lb for secure equipment mounting
  • Includes 12 M6 screws, washers and cage nuts for quick installation
  • RoHS certified and environmentally friendly construction
  • Fits standard 19.7" width with 7.7" depth and height

Specificații

BrandTRIPP LITE
TypeTools and Hardware
ColorBlack
Greutate la expediere3.10 kg
Dimensiunile coletului711 × 457 × 337 mm

Întrebări despre acest articol

Should I pick the 4U bracket or a different height for my server?

The SRWALLBRKT4U provides exactly 4U of vertical space, holding equipment up to 175 lb. Choose it when your server, switch or UPS fits within that height and weight; otherwise select a taller or shorter bracket.

What does the 175 lb load rating mean once the bracket is on the wall?

It means the mounted assembly — bracket plus server, switch or UPS — must not exceed 175 lb. Verify the combined weight of your device and any rails before installation.

How does the wall-mount interface limit what I can install?

The bracket mounts directly to a wall using the supplied 12 M6 screws, washers and cage nuts, giving a fixed 19.7 in width and 7.7 in depth. Equipment must fit those dimensions and the 4U height.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.